Emesent’s Hovermap LHD improves mine productivity and safety by enabling near real-time stope evaluation and hazard identification. Advanced 3D analysis tools are provided directly to remote operators, enabling faster and more informed decision-making.
Featuring robust magnetic mounting feet, the LHD mount provides impact protection and vibration isolation for the Hovermap ST or Hovermap ST-X. It includes M12 connectors for external power and integration with the mine network, as well as an onboard V-mount battery bay for redundant power supply.
Use the Hovermap LHD only as described in the standard operating procedures. Use outside these procedures is at the operator's own risk. It can decrease performance.
The LHD Mount resists shocks and knocks during handling and transport. It is not guaranteed to resist direct impacts from rocks, rock bolts, wire mesh, or other obstacles when it is on the LHD.
Long exposure to saline water and spray slowly damages the LHD Mount and Hovermap. After exposure to a saline environment, rinse both items fully with low-pressure water.
In this section
Technical specifications: The specifications of the LHD Mount.
LHD hardware setup: Install the mount and connect the power supplies.
Software setup: Set up Commander for LHD operation.
Operation: Connect to Hovermap and run a scan from the LHD.
Mission review and data processing: Process a scan on Hovermap, review it, and transfer the files.