The Map Widget provides real-time mapping capabilities, for DJI users when the remote controller is connected. This enables users to monitor drone telemetry data overlaid on a map, ensuring situational awareness even without a reliable connection. This capability is essential, particularly in Pilot Assist and Autonomous missions, where precision and operational insight are critical.
In addition, the Overlay feature facilitates seamless transitions between the map, first-person view (FPV), and point cloud view, ensuring a comprehensive understanding of the operational environment.
Downloading the Map
When initiating a mission for the first time, you may notice that the map overlay appears empty. This is due to the initial download process required for the map data. Once the download is complete, the map will populate with the relevant geographic information and become fully interactive.
Connect your tablet to a Wi-Fi network with internet access.
Launch the Emesent Commander application.
On the Application settings page:
Enable the option to Allow registration with DJI to use DJI drones.
Enable the option to Override default DJI controller frequencies.
.png)
Or the user information page when running the app for the first time.
.png)
Connect to your Hovermap’s Wi-Fi network.
.png)
Connect the remote controller. You should see the controller connected on the Connectivity page.
.png)
Start a Pilot Assist or Autonomous mission. The FPV feed is displayed as the overlay by default.
.png)
Tap the Switch button (or go to Application Settings) to change to map overlay. You will notice that the map appears empty.
.png)
Connect to a Wi-Fi network with access to the Internet. Once connected, a map of your area is automatically downloaded.
.png)
You can download maps for alternate locations by navigating to those areas on the map. However, it is important to note that the cache will be cleared when the application is restarted.
Change the connection back to your Hovermap’s Wi-Fi network.
Switching/Expanding Views
| Tap to changed between the point cloud, map, and FPV feed. |
.png)
|
|
|
.png)
.png)
.png)
| Tap to expand the current overlay into the Main View. |
|
|
.png)
.png)
The point cloud is always visible in the system. If the point cloud is in the Overlay, it cannot be switched out to view FPV and the map simultaneously.
Adding Tasks
When the Main View displays either the map or the FPV feed, adding a task automatically replaces the view with the point cloud, and the map is displayed on the Overlay. Refer to the Mapping, Pilot Assist, or Autonomous Mission for detailed instructions on adding and editing tasks.