Option | Description |
|---|---|
New mission | Takes you back to the Landing Page where you can start a new mission or resume the existing one. |
Mission workflow | Allows you to switch between the Mission workflow steps. |
Observer mode | Enables real-time viewing of the ongoing mission on multiple devices simultaneously, ensuring that stakeholders, supervisors, or team members can monitor the progress from different locations or using other devices. While observers can view the mission progress, control over mission settings and robot operation are disabled to ensure that those monitoring cannot inadvertently interfere with the ongoing operation.
|
Mission reports | Contains a complete list of all available scans for download, including the scan currently in progress (if any). It provides details about the chosen scan and features a graph displaying the scan height and time. Additionally, it includes specific event logs for each scan. Refer to Mission Review and Reports. |
Review missions | Enables onboard processing of completed scans to validate capture quality and generate outputs without post-processing in Aura, supporting rapid verification and faster workflows in the field. Refer to Mission Review and Reports. |
Download logs | Allows you to download logs from Commander to your device. You can download all logs or only those generated in the last 24 hours. Refer to Download Commander Log Files. |
Web UI | Allows you to access the Web UI from the app. Connection to the Hovermap is required. Refer to Hovermap WebUI. |
Application settings | Enable light mode: Changes the color profile of the app to use lighter colors for backgrounds, text, and other interface elements. This helps you see the display better in well-lit environments. Language: Allows you to set the language in which the Emesent Commander interface and content are presented. Measurement units: Allows you to set the measurement units to use in the application.
Overlay: Allows you to set the information presented in the Overlay view, at the bottom left of the screen. Refer to Using the map Widget. Allow registration with DJI to use DJI drones: Select to allow automatic detection of DJI drones when connected to the Hovermap device. This enables the configuration of remote controls, geofence information, and flight control settings required for autonomous control of DJI drones. A connection to the internet is required. This option is not required if you are not using a DJI drone. Override default DJI controller frequencies: If you unselect this option, the DJI controller settings will allow auto switching between 2.4GHz and 5GHz, which may cause the connection between Commander and Hovermap to be unstable or lost. |
Scanner settings | Opens the Scanner Settings panel to configure the connected scanner: volume, RTK corrections and NTRIP profile, gcpgcpcamera anti-banding, and scanner information. See Scanner Settings. |
Network settings | Allows you to manage and configure network connections. The list of available or inactive networks displays any previous connections based on the availability of the Wi-Fi network. |
About | Allows you to view the information about the app, connected robot, the Emesent Cortex version, and the DJI SDK version (which determines the supported robot). In addition, you can also upgrade Emesent Cortex, access the Web UI, and view licensing information from this page. |
Logout | Logs out of the current Commander session. The indicator beside this option shows the time remaining before the login session expires, which varies per user. Refer to Commander login FAQ for session expiry guidance. |
Options Menu
Updated
- Updated on Jul 2, 2026
- Published on May 11, 2026
- 2 minute(s) read
Was this article helpful?