Mission Settings

These settings allow you to configure flight characteristics when performing a mission in Pilot Assist mode.

Setting	Description
RC mode (DJI only)	Sets the remote control mapping mode to determine which hand is used for maneuvering the drone's roll (left or right banking) and pitch (forward or backward movement), as well as controlling the yaw (direction or orientation changes) and throttle (vertical movement and altitude adjustments). The buttons are only enabled if a DJI controller is connected to the tablet. Mode 1: Allows you to control the roll and pitch with your right hand, while the yaw and throttle are controlled by your left hand.
	Mode 2: Allows you to control the roll and pitch with your left hand, while the yaw and throttle are controlled by your right hand. RC mode selection is only available if you have selected the Allow registration with DJI to use DJI drones option on the EULA signup page (when the application is first run) or in the Application settings page.
Stick sensitivity	Sets the level of responsiveness of the control sticks on the remote controller. It determines how quickly and precisely the drone responds to your input when you operate the control sticks.
Max velocity over ground	Controls the maximum speed at which the drone can fly horizontally across the ground. Regulating how fast the drone can travel allows you to maintain control and stability.
Climb rate	Controls how quickly or slowly the drone climbs to higher altitudes. A higher climb rate allows for a quicker altitude gain. A lower climb rate results in a more gradual change in altitude.
Yaw rate	Controls how quickly the drone rotates or turns horizontally while maintaining its current altitude. A higher yaw rate allows the drone to rotate more quickly, resulting in rapid changes in direction. A lower yaw rate provides smoother and more precise control because of the slower rotation.