Videos
      Back to home
      1. Knowledge Base
      2. Hovermap
      3. Videos

      SDK activation with the DJI M300/M350 and Hovermap

      In this video, we show you how to perform an SDK activation with the DJI M300/M350 and Hovermap.

      Note

      The instructions in the video apply to both the M300 and M350. An M300 drone is used in the video. 

      Contents

      • (00:14) Step 1: Mount the M300/M350 bracket to the drone
      • (01:22) Step 2: Connect the drone to the computer
      • (01:50) Step 3: Check the drone settings

      Note

      Do not use the Baud Rate setting indicated in the video. The correct setting for the M300 and M350 drones is 230400.

      • (02:50) Step 4: Power cycle the drone
      • (03:02) Step 5: Ensure that settings have not changed
      • (03:33) Step 6: Connect your devices to Wi-Fi
      • (04:01) Step 7: Start a scan
      • (04:55) Step 8: Confirm that SDK activation is successful
      • (05:56) Step 9: Set up the drone controller
      • (07:31) Step 10: Final checks

      Refer to DJI M300 preparation for Hovermap operation for more detailed information on the SDK activation process.