Upgrade / Downgrade Instructions
      Back to home
      1. Knowledge Base
      2. Cortex
      3. Upgrade / Downgrade Instructions

      Hovermap Feature Upgrade

      Download this upgrade guide here.

      1. Attach the USB flash drive and wait for the status LEDs to return to a slow, pulsing Emesent blue.
      2. On your computer, connect to Hovermap’s Wi-Fi network. The network SSID will appear as st_XXXX, where XXXX is Hovermap’s serial number (located on the compliance plate).
      3. The network password is hovermap.
      4. In a web browser, go to hover.map. The Web UI will appear.
      5. Select Upgrade Firmware.
      6. The Hovermap Upgrade dialog box will appear. Click Next.
      7. Hovermap will confirm that no BSP is found. Click Next.
      8. Hovermap will confirm that no upgrade image is found. Click Next.
      9. Hovermap will confirm that a features update package has been found. Click Next. The system will now spend 2 to 3 minutes checking the integrity of the Hovermap feature image.
      10. When the Ready to start upgrade page appears, remove the USB flash drive.
      11. Once the USB flash drive has been removed, click Install.
      12. Once the Hovermap upgrade is complete, Hovermap will restart automatically and the status LEDs will return to a slow, pulsing Emesent blue. This process will take 20 to 30 minutes.