This document details the hardware required to setup a compatible GNSS receiver to collect RTK data via Backpack for future processing in Emesent Aura.
Backpack RTK Kit
| Included in kit | ||
| 1 |
Protective hardcase backpack |
Resin hardcase backpack with RTK and Hovermap mount. |
| 2 | Cable bag | Contains the following:
|
| 3 | GNSS spacer pole |
The extension pole attaches to Backpack RTK for mounting the GNSS receiver. |
When you purchase the Backpack RTK Kit with the Vehicle RTK Kit, you can choose to get the Backpack RTK Kit without the cable bag.
|
Pictured but not included (sold separately) |
||
| 4 |
Hovermap ST/ST-X |
Emesent mapping payload |
| 5 | V-mount Battery + Battery Charger | Main power source for the Hovermap and the GNSS receiver |
| 6 | GNSS receiver |
The Emesent Hovermap is currently compatible with several Emlid, Trimble and Leica receivers:
The Emlid RS2+ GNSS receiver can be optionally included in the Backpack RTK kit purchased from Emesent. |
Other Required Hardware
| 1 | Base Station setup | Includes your Emesent-compatible GNSS receiver and surveying tripod. This is only required if you do not wish to use CORS networks. |
| 2 | Smartphone/Tablet | Used to configure GNSS receiver settings (via the receiver's own software or app) and check RTK status (via the Emesent Commander app). |
| Computer |
|
|
| Emesent accessories |
|
|