Commander Status Notifications

Notification	Description	Recommended Action
Critical
No Hovermap connected. Please check and turn off any unsupported networks (e.g. Mobile data)	A Hovermap is currently not connected to Commander, but an unsupported network has been detected which may be preventing connection.	You need to approve connection to a Wi-Fi that does not have internet access, or turn off mobile data.
Commander - Hovermap version mismatch	The Emesent Cortex version is not compatible with Emesent Commander. A mission cannot be started unless both versions are compatible.	Download the latest versions of Emesent Cortex and Emesent Commander from the Emesent Customer Portal (https://emesent.com/software-downloads), then reconnect.
Failed to change Shield Settings. Please try again.	Attempting to change the Shield settings failed for an unknown reason.	Try changing the settings again.
Failed to change Mission Settings. Please try again.	Attempting to change the Mission Settings failed for an unknown reason.	Try changing the settings again.
Location services MUST be turned on	The tablet's location services are turned off, resulting in the Wi-Fi information not being published. It needs to be turned back on for reliable payload reconnection.	Enable the Location Services on your device.
Warning
Commander - Hovermap version mismatch	The Emesent Cortex version is not compatible with Emesent Commander. A mission cannot be started unless both versions are compatible.	Download the latest versions of Emesent Cortex and Emesent Commander from the Emesent Customer Portal (https://emesent.com/software-downloads), then reconnect.
Status
Starting Scan	A scan has been started by the user.
Stopping scan	A scan has been stopped by the user.
Establishing onboard communications	The connection from the tablet to the payload is not receiving data and the tablet is waiting for a response from the server.
The preferred Hovermap Wi-Fi is available	When a Hovermap drops out of Wi-Fi range and a new non-Hovermap network is connected, the last Hovermap network will be saved. When the Hovermap comes back in Wi-Fi range, you will receive this notification.	If the Wi-Fi does not automatically reconnect, re-select the preferred Hovermap from the Android Wi-Fi Manager. Disable the auto reconnect option for all other networks.
A new Hovermap has been connected	When a scan is running and the Wi-Fi connection is changed to a new Hovermap network.
A new Wi-Fi network has been connected	The Hovermap being used to run the scan is no longer connected. The Wi-Fi connection is changed to a new non-Hovermap network.	You will need to manually reconnect using the Android Wi-Fi Manager.
Success
Ready for mission	An autonomous scan has been started, all pre-checks have been completed, and the mission is ready to commence.	Arm your robot then press Take Off to start your mission.
Ready for mission	A mapping scan has been started, all pre-checks have been completed, and the mission is ready to commence.	Start your mission.