--- title: "Resolving USB offload failures on Hovermap" slug: "why-doesn-t-data-copy-to-the-usb-flash-drive" updated: 2026-08-24T05:26:55Z published: 2026-08-24T05:26:55Z canonical: "knowledge.emesent.com/why-doesn-t-data-copy-to-the-usb-flash-drive" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Resolving USB offload failures on Hovermap Hovermap is designed to automatically offload scan data to a connected USB drive when the following conditions are met: - Hovermap is powered on and functioning normally. - A USB drive is connected and formatted correctly. - There is scan data in the **Current** folder ready for transfer. If your data is not offloading as expected, follow the steps below to verify each requirement and troubleshoot potential USB issues. ## Troubleshooting steps ### Step 1: Ensure Hovermap is powered on **Confirm the power source** Make sure your Hovermap is connected to a reliable power source: - If using the V-Mount battery, press the button on the side of the battery to check its charge level. - If Hovermap is connected to a drone, check the drone's battery status. - If using an alternative power source, ensure it meets Hovermap's voltage and current requirements. (Hovermap ST/ST-X units require 14 to 55 VDC, 60W) > [!NOTE] > A slow pulse of Emesent blue on the rear LED status indicators confirms that Hovermap is powered on and has successfully completed start-up. ### Step 2: Confirm Hovermap is accessible 1. **Connect to Hovermap's Wi-Fi.** On your tablet or mobile device, connect to the Hovermap Wi-Fi network. 2. **Open Commander or WebUI.** - Open **Commander** and verify that Hovermap appears in the device list. - Alternatively, access the **WebUI** via a browser via hover.map For additional information on using the **WebUI**, please refer to the articles below. - [Web UI](/v1/docs/web-ui) - [Hovermap Web User Interface](/v1/docs/hovermap-interfaces) ### Step 3: Confirm data is available to transfer **Check the 'Current' folder.** Only data located in the **Current** folder is automatically transferred when a USB device is connected. If this folder is empty, Hovermap will not initiate a USB offload. Data stored in the **Transferred** folder can also be offloaded, but it must be manually moved back to the **Current** folder first. **Move data back from 'Transferred' if needed.** If your data has already been moved to the **Transferred** folder, you can re-export it: 1. Navigate to the **Transferred** tab in the **WebUI**. 2. Select the scan(s) you wish to offload. 3. Click **Move** to return the scans to the **Current** folder. 4. Connect your USB drive. If all requirements are met, offload should begin automatically. > [!NOTE] > A wiping motion of Emesent blue on the Hovermap's status indicator signifies that the system is actively offloading data to the connected USB device. ### Step 4: Troubleshoot the USB drive If offload still does not occur, the issue is likely with the USB device. Check the following: **Check available storage space.** Ensure the USB drive has sufficient free space to store your scan data. **Confirm USB file system format.** Hovermap requires the USB drive to be formatted as **exFAT**, which is compatible with all Hovermap systems. > [!WARNING] > Formatting will erase all data on the drive. Back up any important files first. #### Formatting to exFAT in Windows: 1. Insert the USB drive into your computer. 2. Open **File Explorer**, right-click on the drive, and select **Format**. 3. Under **File System**, choose **exFAT**. 4. Click **Start** and confirm when prompted. **Inspect the USB port and connector.** - Visually check both the USB drive and Hovermap's USB port. - Ensure there is no dirt, dust, or physical damage such as bent or corroded pins. - Use a flashlight if needed to inspect the port. **Test with a different USB drive.** Try another known-good USB device to rule out hardware failure through process of elimination. ### Step 5: Workaround - Offload data over Wi-Fi If USB offload still does not work, you can download scans over Wi-Fi using the **Commander WebUI**: 1. Connect to Hovermap's Wi-Fi. 2. Open the **Commander WebUI** and navigate to the **Current** tab. 3. Click the **Download** button next to each scan to transfer it to your tablet or computer. This method can be used as a temporary workaround until USB offload is working again. ### Step 6: Contact support If none of the above steps resolve the issue, your Hovermap unit may require inspection or repair. Please contact Emesent Support for further assistance. [Contact Client Support](https://emesent.com/customer-support/) Include the following when contacting support: - Your Hovermap serial number. - A description of the issue and the steps you've tried. - If possible, please provide any recent transfer logs stored on the USB drive. Alternatively, you can share a screenshot of the transfer log from the Commander WebUI after attempting the offload.