--- title: "Factory Reset" slug: "reset-gx1-to-factory-settings" updated: 2026-10-13T22:41:53Z published: 2026-10-13T22:41:53Z canonical: "knowledge.emesent.com/reset-gx1-to-factory-settings" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Factory Reset This article explains how to reset the GX1 to its factory settings. A factory reset returns the GX1 to its as-delivered state and clears all user data. > [!WARNING] > A factory reset is permanent and cannot be undone. It deletes all user data on the GX1, including: > > - Scan data on the payload. > - NTRIP profiles and settings. > - The Wi-Fi password. > - Logs. > - Saved device authorizations. > > Back up any scan data you need before continuing. See [Offload GX1 scan data](/v1/docs/offload-gx1-scan-data). ## When to use a factory reset A factory reset permanently deletes all user data and is not part of routine operation. If unsure whether a factory reset is the right step, [contact Emesent Client Support](https://www.emesent.com/client-support/) first. Use a factory reset to: - Clear a lost or compromised Wi-Fi password when no other recovery option is available. A new password is set on reconnection. - Clear all user data before returning a GX1 to Emesent. - Recover from a persistent fault that other troubleshooting steps have not resolved. ## What you will need - A GX1 with a charged battery installed. - For the reset button method: a paperclip or SIM removal tool. ## Reset using Commander Connect Commander to the GX1 before you begin. See [Connect GX1 to Commander](/v1/docs/connect-gx1-to-commander). 1. Open the options menu. 2. Select Scanner settings. 3. Select Factory Reset Scanner. 4. Select Reset Scanner to confirm. The GX1 performs the reset and reboots. | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(596).png) | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(597).png) | | --- | --- | ## Reset using the reset button ### Step 1: Locate the reset button 1. Pinch and remove the Battery Bay Door. See [Install and remove GX1 batteries](/v1/docs/install-and-remove-gx1-batteries). 2. Locate the reset button in the top-left corner of the battery bay. The button sits inside a small hole. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-1784861805319.png) ### Step 2: Perform the reset 1. Insert a paperclip or SIM removal tool into the hole. 2. Press and hold the **Factory Reset Button** for at least 10 seconds, until the LEDs flash red. 3. Release the button. The GX1 performs the reset and reboots. ## Reconnect after a reset 1. Wait for the GX1 to finish rebooting. 2. Connect to the GX1 using the default Wi-Fi password, `hovermap`. 3. When prompted, set a new password. The GX1 cannot be used until a new password is set. ## Outcome The GX1 is reset to its factory settings and returned to its as-delivered state, with all user data cleared. ## Additional information - [GX1 maintenance and service](/v1/docs/gx1-maintenance-and-service) - [Connect GX1 to Commander](/v1/docs/connect-gx1-to-commander) - [Offload GX1 scan data](/v1/docs/offload-gx1-scan-data)