--- title: "Notification During Mission" slug: "notification-during-mission" updated: 2026-08-24T05:26:55Z published: 2026-08-24T05:26:55Z canonical: "knowledge.emesent.com/notification-during-mission" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Notification During Mission ## Critical | Notification | Description | Recommended Action | | --- | --- | --- | | **Hovermap battery critical** | The remaining battery capacity has dropped to a level where the robot needs to land (if it's a UAV) and disarm. | | | **Lost Hovermap control** | The robot has unexpectedly taken back control of the robot from Hovermap. | Switch to robot control mode. | | **Hovermap control refused** | The robot has unexpectedly denied control to Hovermap. | Switch to robot control mode. | | **Robot hardware failure** | There has been a failure in the robot or Hovermap hardware integrity. Generally, this means the robot has crashed. | Switch to robot control mode to return home. Check the robot’s condition and restart the robot. | | **Lost robot link** | The control and telemetry link to the robot has been lost. This may be caused by a failure in the interface cable, or it becoming unplugged. | Switch to robot control mode and land as soon as possible. | | **Navigation solution failure - lost navigation** | No usable state estimate is available. The robot will return home via the rally point set. | Switch to robot control mode and manually return to home safely. | | **SLAM solution failed** | The local SLAM solution has failed. This indicates that the data captured in this mission will not result in a good map. | Stop then restart your mission to continue. | ## Warning | Notification | Description | Recommended Action | | --- | --- | --- | | **High Hovermap temperature** | The CPU has undergone throttling events recently, and the heatsink may be hot to the touch. | Avoid touching the Hovermap body while hot. | | **Hovermap battery low** | The remaining battery capacity has dropped to a level where the robot needs to return home. The robot will return home via the rally point if set. | Allow the failsafe to complete. | | **Connection between Hovermap and user device was lost** | The link to the ground control station has been lost, at a time in the mission where it is required. The robot will return home. | Monitor for safe flight. | | **Take off aborted** | The robot encountered difficulty in executing the takeoff procedure. This can occur when there are obstacles near the robot. | Check for obstacles near the robot. | | **LiDAR point loss** | The LiDAR has encountered an environment in which it cannot operate effectively. The robot will return home via the rally point if set. | Allow the failsafe to complete. | | **Dust failsafe triggered** | The path planner is unable to make a plan, and is 'stuck'. This is most likely to happen because of excessive dust. The robot will return home via the rally point if set. | Allow the failsafe to complete. | | **Navigation solution degraded** | Hovermap's state estimate accuracy is decreasing due to environmental conditions causing the SLAM system to be degraded. The robot will return home via the rally point if set. | Monitor for safe flight and switch to robot control mode if required. | | **Hovermap cannot take control** | The preconditions required to allow Hovermap to take control of the robot are not satisfied. | Switch to robot control mode. | | **Robot’s position not stable** | The requirements for arming the robot have not been met. Hovermap is not ready. | The robot will need to be restarted if it is reporting this while the robot is actually stationary. | | **Robot outside geofence** | The robot indicates it is outside a geofence. | Return the robot to a safe distance inside the geofence to ensure a mission can be started and control maintained during a mission. | | **LiDAR point data unstable** | This will appear if a LiDAR point loss notification has already appeared during a mission. | Return to home using Pilot Assist and avoid the area where the LiDAR point loss occurred. | ## Caution | Notification | Description | Recommended Action | | --- | --- | --- | | **Remote control has been disconnected** | The link to the remote control unit has been lost, at a time in the mission where it is required. The robot will return home. | To intervene when connection to the remote control has been recovered, change to Pilot Assist mode first then to robot control mode if required. |