--- title: "Install SIM card" slug: "install-a-sim-card-in-gx1" updated: 2026-08-24T05:26:55Z published: 2026-08-24T05:26:55Z canonical: "knowledge.emesent.com/install-a-sim-card-in-gx1" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Install SIM card This article explains how to install a SIM card in the **GX1** to enable cellular connectivity. > [!NOTE] > Contact a [regional Emesent partner](https://www.emesent.com/resellers) or [Emesent](https://www.emesent.com/client-support/) directly for help choosing the best SIM. ## What you will need - A **GX1**. - A **nano-SIM card**. ## Procedure ### Step 1: Confirm the GX1 scanner is not active > [!CAUTION] > Do not open the battery bay while the **GX1** scanner is active. Doing so may cause data loss or hardware damage. 1. Confirm the **GX1** scanner is not active before proceeding. ### Step 2: Remove the Battery Bay Door 1. Pinch the **Battery Door Actuators** on the **Battery Bay Door** together and pull the door away from the **GX1**. | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-1784850134910.png) | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-1784849929670.png) | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-1784850457203.png) | | --- | --- | --- | ### Step 3: Release the SIM card tray 1. Locate the **SIM card tray** on the right side of the battery bay. 2. Press the **SIM card tray** inwards to release the spring lock. The tray clicks and pops out slightly. 3. Grip the **SIM card tray** on both sides and gently pull it outwards to remove it. | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-1784854011176.png) | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-1784854036511.png) | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-1784854061319.png) | | --- | --- | --- | ### Step 4: Insert the SIM card 1. Place the **nano-SIM card** into the **SIM card tray**. 2. Slide the **SIM card tray** and **nano-SIM card** into the slot. 3. Press the **SIM card tray** in until it clicks. The click confirms the tray is fully seated. | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(682).png) | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-1784854011176.png) | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-1784854216555.png) | | --- | --- | --- | ## Outcome The **nano-SIM card** is installed and the **GX1** connects to the network automatically. If the device does not connect, configure the SIM settings in **Commander**. See [Configure SIM settings in Commander](/v1/docs/configure-sim-settings-in-commander).