--- title: "Getting Started" slug: "getting-to-know-commander" status: "update" updated: 2026-08-24T05:23:42Z published: 2026-08-24T05:27:12Z canonical: "knowledge.emesent.com/getting-to-know-commander" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Getting Started This section gets Commander installed and ready to run a mission. Work through the three steps below in order, then see the additional setup articles if they apply to you. ## Install Commander Install the app on your device: - [Installing Commander on an Android tablet](/v1/docs/installing-commander-on-an-android-tablet) - [Installing Commander on Freefly Pilot Pro tablet](/v1/docs/installing-commander-on-freefly-pilot-pro-tablet) ## Set up Commander Complete [first-time setup](/v1/docs/commander-first-time-setup) to configure the app before your first mission. ## Log in Sign in to Commander to start using it. See [How to log into Commander](/v1/docs/how-to-log-into-commander), and [Commander User Login](/v1/docs/faq-1) for login details and common questions. ## Additional setup Depending on your hardware and workflow, you may also need: - [Register App (for DJI drones)](/v1/docs/register-app-for-dji-drones): required when flying DJI drones. - [Device benchmarking](/v1/docs/device-benchmarking): check your device meets performance requirements. - [Uninstalling Commander](/v1/docs/uninstalling-commander): remove the app if needed.