--- title: "Downgrade Emesent Cortex" slug: "downgrade" updated: 2026-09-23T00:36:55Z published: 2026-09-23T00:36:55Z canonical: "knowledge.emesent.com/downgrade" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Downgrade Emesent Cortex This article explains how to downgrade Emesent Cortex on a Hovermap ST or ST-X. ## What you will need - A Hovermap ST or ST-X with Emesent Cortex 3.1 or later. Hovermap 100 is not supported. - A USB drive. - The Cortex image file for the downgrade version. - A device with Wi-Fi and a web browser. ### Downgrade limits The oldest version available for a downgrade depends on the highest Cortex version that was ever installed on the Hovermap. | Highest Cortex version installed | Oldest version available for downgrade | | --- | --- | | 3.1.x | 2.7.23 | | 3.2.x | 2.7.23 | | 3.3.0, 3.3.1, 3.3.2 | Do not downgrade. Contact Emesent Technical Support Services. | | 3.3.3 | 3.3.0 | | 3.4 and later | Contact Emesent Technical Support Services. | ## Procedure > [!CAUTION] > Warning > > Do not downgrade a Hovermap from Cortex 3.3.0, 3.3.1 or 3.3.2. A downgrade from these versions can make the Hovermap unusable. Contact Emesent Technical Support Services before a downgrade from these versions. ### Step 1: Prepare the USB drive 1. Use the downgrade limits table to select the downgrade version. 2. Copy the Cortex image file to the USB drive (for example, `hvm_st_3.3.3.img`). 3. Make sure that the USB drive has no other Cortex image files. The system can select a different file. ### Step 2: Connect to the Hovermap 1. Connect to the Hovermap Wi-Fi network. 2. In a web browser, go to hover.map. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(298).png) ### Step 3: Open the firmware upgrade 1. Expand the **DEVICE** section. 2. Click **UPGRADE FIRMWARE**. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(299).png) ### Step 4: Insert the USB drive 1. Insert the USB drive into the Hovermap ST / ST-X back panel. 2. Wait until the LEDs show breathing blue. The system copies scans that are not transferred to the USB drive and moves them to the **TRANSFERRED** tab. ### Step 5: Allow supported downgrades 1. Set **Allow Supported Downgrades** to on. 2. Read the warning, then click **YES**. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(300).png) ### Step 6: Search for the upgrade image 1. Click **SEARCH**. The system does not find a BSP upgrade image. This is correct. 2. Click **NEXT** to search for a Hovermap upgrade image. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(301).png) ### Step 7: Check the versions 1. Make sure that the **Hovermap Version** and **Upgrade Version** numbers agree with the downgrade limits table. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(302).png) > [!WARNING] > Caution > > Make sure that the downgrade version is correct. Each new Cortex installation permanently changes the oldest version available for a downgrade. ### Step 8: Start the downgrade 1. Click **NEXT** to start the downgrade. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(303).png) ## Outcome The selected Cortex version is installed on the Hovermap. ## Additional information - For help to select a version, or for help with a downgrade, contact **Emesent Technical Support Services** at [client.success@emesent.com](mailto:client.success@emesent.com).