--- title: "DJI" slug: "dji" status: "update" updated: 2026-10-19T01:49:48Z published: 2026-10-19T01:49:48Z canonical: "knowledge.emesent.com/dji" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # DJI The articles in this section explain how to use Hovermap with DJI Matrice 300 and Matrice 350 drones. They cover hardware setup, the DJI SDK, RTK data capture, flight checklists, and troubleshooting. ## In this section ### Set up - [DJI M300 and M350 setup guide](/v1/docs/dji-setup-guide): Prepare the drone to carry Hovermap and share autonomy and GPS data. - [M300 and M350 RTK quick start guide](/v1/docs/m300-m350-overview): Set up and configure the DJI D-RTK2 and Emlid base stations. ### Fly and capture - [Checklists](/v1/docs/checklists): Pre-flight, in-flight, and shutdown checklists for DJI flights. - [Capture and process RTK data with the M300 and M350](/v1/docs/capture-and-process-rtk-data-with-the-m300-m350): Capture RTK data from the drone and make a georeferenced point cloud in Aura. - [Scan capture with DJI Pilot 2 (video)](/v1/docs/dji-pilot-2-hovermap-st-x-mapping-mode-al0): Set up an automated DJI Pilot 2 mission with Hovermap ST-X in Mapping mode. ### Troubleshoot - [DJI troubleshooting](/v1/docs/troubleshooting-4): Recover diagnostic data after an incident or unexpected behavior.