--- title: "Commander & Cortex Release" slug: "commander-cortex-release-note" status: "update" updated: 2026-11-19T04:01:33Z published: 2026-11-19T04:01:33Z canonical: "knowledge.emesent.com/commander-cortex-release-note" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Commander & Cortex Release ## Commander 2.4 and Cortex 4.3 **Release date:** 19th November 2026 > [!WARNING] > Always check the [Supported Devices](/v1/docs/supported-devices-compatibility) page before updating to ensure compatibility. ### Overview This release includes Commander 2.4.1 and Cortex 4.3.0. Commander 2.4.1 includes all changes of Commander 2.4.0, which Emesent did not release publicly. Hovermap ST, ST-X and GX1 now run the same Cortex release. Each change below shows the scanners it applies to: all scanners, GX1, or Hovermap ST and ST-X. ### Major changes #### All scanners **Simpler installation.** The scanner Board Support Package (BSP) and Cortex install as one package. #### GX1 **Vehicle mode.** GX1 can scan from a moving vehicle. Vehicle mode sets up the cameras for a scan from a vehicle mount. ### Minor changes #### All scanners **Scanner address.** Added `emesent.internal` as the default scanner address; `hover.map` is still supported. #### GX1 **Image quality.** GX1 applies the camera tuning that matches the fitted lenses. **Wi-Fi.** In China, Russia, Bahrain and Indonesia, GX1 uses the 2.4 GHz Wi-Fi band. #### Hovermap ST and ST-X **RTK status.** Commander shows the RTK status more clearly. Commander recognizes RTK for a backpack or a vehicle. **Spot.** Connection improvements between Hovermap and Spot. **Wi-Fi password.** Commander does not show the Wi-Fi password function for Hovermap in this release. The Web UI no longer has it. A changed password is kept when upgrading. ### Resolved issues #### All scanners - Commander keeps the path history and the scanner position if the connection is lost. - Mission reports show the correct duration for missions longer than 60 minutes. - The PPK selection persists when moving between pages of the mission workflow. - The Task Manager remains closed after it is collapsed. #### GX1 - The GNSS settings page shows only when it applies to the setup, and it shows the correct settings. - The "DJI app not registered" warning no longer shows with GX1. #### Hovermap ST and ST-X - Improved network communication with the Freefly Astro. - DJI registration completes. - Commander no longer shows a false low battery warning when the scanner is on a drone. ### Known issues and limitations Please refer to the [Known Issues and Limitations](/v1/docs/known-issues-and-limitations) page for the most current information. - **Spot (Hovermap):** A Hovermap scan that starts before Spot has fully started can cause a Critical Battery warning. **Workaround:** Make sure that Spot has had enough time to start its internal component and compute system, so that Hovermap detects it correctly. - **Wi-Fi password (Hovermap):** Commander does not show the Wi-Fi password function for Hovermap. A Hovermap on Cortex 4.1.3 cannot change the password. ### Next steps - **Confirm compatibility:** Check the [Supported Devices](/v1/docs/supported-devices-compatibility) page before updating. - **Update:** [Update Cortex](/v1/docs/upgrade-emesent-cortex) first, then [Update Commander](/v1/docs/installing-commander-on-an-android-tablet). - **Need help?** Contact [Client Support](https://emesent.com/client-support/) for assistance.