--- title: "Vehicle RTK" slug: "vehicle-rtk" status: "update" updated: 2026-08-24T05:23:48Z published: 2026-08-24T05:27:12Z canonical: "knowledge.emesent.com/vehicle-rtk" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Vehicle RTK The Vehicle RTK section covers the vehicle-mounted RTK kit for Hovermap, which enables mobile mapping missions with high-accuracy GNSS positioning from a vehicle platform. This includes the components in the kit, the steps to assemble the hardware on the vehicle, and the best practices for a vehicle scan. ## Included in kit | Component | Description | | --- | --- | | RTK vehicle mount (with magnetic feet) | Mechanical mount that secures the Hovermap to the vehicle, with the GNSS receiver and battery mount. | | Vacuum grip feet (x4) | Replace the magnetic feet with the vacuum grip feet to attach the vehicle mount to non-magnetic surfaces. | | Spanner | Changes the mount between the magnetic feet and the vacuum grip feet. | | 100 mm GNSS spacer pole | Extension pole that attaches to the RTK vehicle mount to mount the GNSS receiver. | | GNSS cable | Lemo to Lemo cable for the Emlid, Trimble, or Leica receiver. | | Hovermap cable | Connects the Hovermap ST or ST-X to the RTK vehicle mount. | ![Vehicle RTK kit components](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(215).png) ## Sold separately | Component | Description | | --- | --- | | Hovermap ST or ST-X | Emesent mapping payload. | | V-mount battery and battery charger | Main power source for the Hovermap and the GNSS receiver. | | GNSS receiver | Refer to [Supported GNSS receivers](/v1/docs/3rd-party-recievers) for the compatible Emlid, Trimble, and Leica models. | > [!NOTE] > The Emlid RS2+ GNSS receiver can be included in a Vehicle RTK kit purchased from Emesent. ## Additional hardware The following hardware is not supplied in the Vehicle RTK kit. | Component | Description | | --- | --- | | Base station setup | Optional. A compatible GNSS receiver and a surveying tripod. This is necessary only when a CORS (Continuously Operating Reference Stations) network is not used to supply the RTK corrections. | | Smartphone or tablet | Configures the GNSS receiver settings through the receiver's own application, and shows the RTK status in Emesent Commander. | | Computer | PC or laptop with a current version of Chrome, Firefox, Safari, or Edge. | ![Vehicle RTK hardware assembled on a vehicle](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/vehicle_rtk_hardware_converted-image-nsg0zxes.png) ## In this section - [Hardware setup](/v1/docs/hardware-setup): how to attach the Vehicle RTK mount to the vehicle and install the Hovermap and the GNSS receiver. - [Best practice for Vehicle RTK](/v1/docs/best-practice-for-vehicle-rtk): how to get the best georeferencing accuracy from a vehicle scan.