--- title: "Upload 360 images and point clouds to third-party software" slug: "upload-360-images-and-point-clouds-to-third-party-software" updated: 2026-08-24T05:26:44Z published: 2026-08-24T05:26:44Z canonical: "knowledge.emesent.com/upload-360-images-and-point-clouds-to-third-party-software" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Upload 360 images and point clouds to third-party software This article explains how to upload extracted 360 images and the associated point cloud to third-party visualization platforms. The four platforms officially tested to work with Aura are Pointerra3D, Cintoo Cloud, Bently iTwin, and Prevu3D. > [!TIP] > Aura version 1.9 or later allows you to view geolocated 360 panoramic images alongside point clouds. ## What you will need - Extracted 360 images and the associated CSV reference files, output by Aura (see **Process a 360 scan and extract images in Aura**). - A processed point cloud from the same scan. - An active account with the third-party platform being used. - For platform-specific file format requirements, see the relevant procedure below. ## Procedure Each procedure below is independent. Follow the steps for the platform being used. ### Step 1: Upload to Prevu3D Please link to the [Prevu3D instructions for uploading scans](https://doc.prevu3d.com/docs/upload-scans). ### Step 2: Upload to Pointerra 3D CORE | **File format requirements** | **Support for various file formats and sources (e.g. LAS/LAZ, PTS, E57, Geotiff, XYZ, PLY, SHP, DXF, KML, Geojson, ESRI GDB, OBJ, IFC, FBX, Cesium 3D Tiles, ECW, JPGs)** | | --- | --- | 1. Go to [Core - Pointerra3D](https://www.pointerra.com/product/core/) and log in to your Pointerra3D account. 2. Click the **Upload** button on the top right of the page to display the **Upload data** wizard. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(448).png) 3. Click Add files then browse for the point cloud files (**LAZ)** that were processed in Emesent Aura (before the image extraction). The point cloud file(s) in the `write_global` folder must be used for this, not the ones in any of the georeferenced `write_global_xxx` folders. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(449).png) 4. Specify the **Source coordinate system**. If there is no GPS/RTK data in the scan, select **My data is not georeferenced**. - or - Select **Let me select from a list of coordinate systems** if the data is georeferenced. The Coordinate System should match the coordinate system described by the .prj file(s) in the write_global folder. Usually, this is a **WGS84 UTM** zone, with the **Vertical Datum** set to **Ellipsoid**. > [!TIP] > Before importing into Pointerra, ensure the data is projected using an external tool. You can use third-party GIS software like QGIS or Global Mapper to re-project your data to a different coordinate system. Note that both the point cloud files and the frames_pointerra.csv (see below) must be re-projected the same way. Re-projection of the point cloud and images will come in a future version of Aura. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(450).png) > [!TIP] > Source vertical units are in meters. 5. Enter any metadata information to help identify the scan (optional). 6. Click the **360 Photos** button. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(451).png) 7. Enter a dataset name then under **Source Files**, click on the **Upload** tab. 8. Click **Add files** to attach the images and the **frames_pointerra.csv** file, which contains the spatial reference and file association. > [!NOTE] > It is recommended to manually select the files instead of adding a folder as there may be additional files in a folder that may confuse the system. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(452).png) 9. If your data is georeferenced, ensure the **Same as point cloud** option under **Source coordinate system** is selected. 10. Click **Add**. 11. Specify the destination of the point cloud and images in the Pointerra cloud folder structure. 12. Configure the email notifications (optional). 13. After completing the wizard, click the **Begin Upload** button. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(453).png) 14. Wait for the upload to be completed before closing the web browser. 15. You will be taken to a **Jobs** screen where you can track the progress of the processing job, when it is completed you receive a notification that it is available to view. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(455).png) ### Step 3: Import scans to Cintoo Cloud | **File format requirements** | **E57, traj (.xyz), .jpeg** | | --- | --- | 1. Click the cloud icon in the top right to install the application locally. Once installed (using admin privileges), upload the 360 images within the selected project. This will launch **Cintoo Connect**. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(457).png) 1. Click the **Indoor Mobile Scanner** tab. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(458).png) 2. Select **Emesent Hovermap** as the source **Device / Format**. 3. Select the point cloud (E57) and the scanning path (.xyz) files generated from Emesent Aura. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(459).png) 4. You may modify the **Positions sampling** value as required. For example, a value of **1/4** creates 1 scan location for every 4 panoramic images included in the scanning path. The number of 3D scans and the average distance between each one is indicated in Cintoo Connect and will be added to your scan count. 5. Click **Import**. 6. Check the **Messages** tab from time to time to see if the process is running smoothly. 7. Your new 3D scans will appear in your Cintoo Cloud project. ### Step 4: Import 360 images to Cintoo Cloud Importing the 360° images to Cintoo requires an additional step. The images are geolocated within the cloud and are presented as the same coordinate system that is available to the 360 scans. > [!TIP] > The 360° images do not count as scans in your scan count. > > The maximum number of 360 images that you can upload to Cintoo Cloud is limited to the number of scans that you subscribed to. For example, if you have a subscription for 5,000 scans, you can upload up to 5,000 additional 360° images. > > 360° images are 2D only, so you cannot use them to add annotations (which are linked to a 3D point) or to make measurements. They are used for display only. 1. Using Cintoo Connect, go to the **Terrestrial Laser Scanner** tab then click **Select input files**. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(460).png) 1. Navigate to the output folder that was created during the Emesent Aura 360 image extraction step (it will be inside the second output folder from the active scan directory). **For example:** *C:\..\Output\frame_extraction\frames\* 2. Select the **frames_cintoo.csv** file and click Import. The import and upload process will start automatically. > [!TIP] > The **frames_cintoo.csv** file already contains the correct column headings for importing into Cintoo. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(474).png) ### Step 5: Import Emesent point cloud to iTwin (Bentley) Before starting iTwin import, complete the following one-time setup: - Download and install iTwin Capture Import and Upload Tool (available from Bentley) - Download and add Emesent template for uploading the point cloud (available from Bentley) - Download and add Generic Mobile Mapping template for uploading the 360 images (or Panoramas as Bentley calls them) [https://kb.orbitgt.com/_media/237/desktop_ext/mapping/manage_import/mobile_mapping_generic.zip](https://kb.orbitgt.com/_media/237/desktop_ext/mapping/manage_import/mobile_mapping_generic.zip) To import the point cloud: 1. Click the **Resources** button then select **Create Mapping Resource**. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(461).png) 2. Specify the following settings: | **Field** | **Value** | | --- | --- | | **Directory** | Choose the write global output for your point cloud | | **Name** | Enter a name for your resource | | **Template** | Select **Emesent-Hovermap** | | **CRS** | Select the appropriate CRS for your dataset | 1. Click **Create**. 2. In the Edit Mapping Resource panel, click **Import point cloud**. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(462).png) 3. Click **Select Files** then browse for the point cloud generated using Emesent Aura. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(463).png) 4. Click **Start Now**. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(464).png) 1. Wait for the dataset to load. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(465).png) ### Step 6: Import 360 images to iTwin (Bentley) 1. Click the **Resources** button then select **Create Mapping Resource**. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(466).png) 1. Specify the following settings: | **Field** | **Value** | | --- | --- | | **Type** | Mobile | | **Directory** | Enter the frames directory from your 360 image output (that includes all the images) | | **Name** | Enter a name for your resource | | **Template** | Select **Mobile Mapping Generic** | | **Source / Target CRS** | Select the appropriate CRS for your dataset | 1. Click **Create**. 2. In the Edit Mapping Resource panel, click **Import Panorama 1**. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(467).png) 1. Click **Choose File** then browse for **frames_bentley.csv** file located in the **frame_extraction** folder generated during the image extract process in Emesent Aura. 2. Click **Open File Location** then copy all the images from the **frame_extraction** folder into this folder. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(468).png) ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(469).png) 3. Click on the **Mobile Mapping** tab at the bottom window then click on one of the capture points to view the corresponding 360 images. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(470).png) ## Outcome The 360 images and associated point cloud have been uploaded to the chosen third-party platform, where they can be viewed, shared, and (depending on the platform) annotated or measured. ## Additional information - For prerequisites and earlier steps, see [Capture a 360 scan with Hovermap](/v1/docs/capture-a-360-scan-with-hovermap) and [Process a 360 scan and extract images in Aura](/v1/docs/process-360-panoramic-images-scan)**.**