--- title: "Set the GX1 camera anti-banding frequency" slug: "set-the-gx1-camera-anti-banding-frequency" updated: 2026-08-24T05:26:55Z published: 2026-08-24T05:26:55Z canonical: "knowledge.emesent.com/set-the-gx1-camera-anti-banding-frequency" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Set the GX1 camera anti-banding frequency Banding is a pattern of vertical light and dark bands across the images the GX1 camera captures. It appears under mains-powered artificial lighting, which flickers at twice the local supply frequency (approximately 100 Hz in 50 Hz regions and 120 Hz in 60 Hz regions). When the camera exposure is not aligned with this flicker, the bands appear in the captured images. The main effect is reduced image quality; in severe cases, banding can also reduce colour accuracy when the images are used to colorize a point cloud. Images captured outdoors or under natural light are not affected. The GX1 camera **Anti banding** setting reduces banding by matching the camera exposure to the local lighting frequency. This article explains how to set it. **Anti banding** prevents banding at capture time but does not remove it from images already captured, so set the correct frequency before scanning and confirm it after moving to a location with a different mains supply. ## What you will need - A GX1 connected to Commander. See [Connect GX1 to Commander](/v1/docs/connect-gx1-to-commander). ## Procedure ### Step 1: Open Scanner Settings 1. In Commander, open the **Options** menu. 2. Select **Scanner Settings.** ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(726).png) ### Step 2: Identify the local mains frequency Determine the mains electricity supply frequency for the scan location, using the regional guidance below: | Mains frequency | Regions (typical) | | --- | --- | | 50 Hz | Australia, New Zealand, the United Kingdom, Europe, and most of Asia and Africa | | 60 Hz | The United States, Canada, Mexico, and parts of South America | If the supply frequency is unknown, check the local mains supply rating. > [!NOTE] > In Japan, the mains frequency varies by region: set 50 Hz in eastern Japan (including Tokyo) and 60 Hz in western Japan (including Osaka). Confirm the local supply before scanning. ### Step 3: Set the Anti banding frequency 1. Scroll down to **Camera** and set the **Anti banding** toggle to **50 Hz** or **60 Hz** to match the mains frequency identified in [Step 2](/v1/docs/set-the-gx1-camera-anti-banding-frequency#step-3-identify-the-local-mains-frequency). > [!WARNING] > The setting will apply to all subsequent captures. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(739).png) ## Outcome The GX1 camera **Anti banding** setting matches the local lighting. Images captured under mains-powered artificial light show minimal banding. ## Additional information - For related camera and processing content, see [GX1 field of view](/v1/docs/gx1-field-of-view) and [GX1 scan data processing](/v1/docs/process-gx1-scan-data).