--- title: "Power GX1 on and off" slug: "power-gx1-on-and-off" updated: 2026-08-24T05:26:55Z published: 2026-08-24T05:26:55Z canonical: "knowledge.emesent.com/power-gx1-on-and-off" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Power GX1 on and off This article explains how to power the GX1 on and off. ## What you will need - A GX1 with a charged battery installed (see [Install and remove GX1 batteries](/v1/docs/install-and-remove-gx1-batteries)). ## Procedure ### Step 1: Power on the GX1 1. Press and hold the **Power Button** on the **GX1 Control Panel** until all the **Status Indicator Lights** illuminate one after another, then release. 2. Wait approximately 1 minute for startup to complete. The GX1 is ready when the **Status Indicator Ring** and **Power Button** slow-pulse blue and the startup sound plays. | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-1784856117983.png) | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-1784856282105.png) | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-1784856213661.png) | | --- | --- | --- | ### Step 2: Power off the GX1 1. Press and hold the **Power Button** until the **Status Indicator Lights** turn off one after another and the **Power Button** light returns to orange. | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-1784856282105.png) | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-1784856841553.png) | | --- | --- | ## Troubleshooting If the GX1 does not power on: - If the **Power Button** isn't lit orange, the battery isn't seated or is depleted. - Check the battery is fully seated, contacts down, **Battery Removal Tab** at the top. See [Install and remove GX1 batteries](/v1/docs/install-and-remove-gx1-batteries). - Press the button on the battery to check its charge. If no LEDs light, charge it or swap for a charged one. See [Charge GX1 batteries](/v1/docs/charge-gx1-batteries). ## Outcome The GX1 is powered on and ready to connect to Commander, or safely powered off and ready for storage. ## Additional information - To begin a mission after powering on, see [Connect GX1 to Commander](/v1/docs/connect-gx1-to-commander).