--- title: "Perform a mapping mission on a smartphone" slug: "operating-on-a-smartphone" updated: 2026-08-24T05:26:44Z published: 2026-08-24T05:26:44Z canonical: "knowledge.emesent.com/operating-on-a-smartphone" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Perform a mapping mission on a smartphone This article explains how to run a mapping mission using Emesent Commander on an Android smartphone. Use this procedure to complete a scanning mission in Mapping mode using the smartphone interface. The smartphone interface supports the following features: starting and stopping scans, enabling Observer Mode, accessing the Web UI, downloading logs, and configuring application settings. Although the steps for conducting a mapping mission are similar across devices, this article covers what is specific to the smartphone interface. For detailed information on the full mission workflow, refer to the Mapping, Pilot Assist, or Autonomous Mission articles > [!WARNING] > Autonomous missions cannot be started from a smartphone. If an Autonomous mode mission is already in progress, you can monitor it using Observer Mode only. ## What you will need - Android smartphone with Emesent Commander installed - Hovermap device ## Procedure ### Step 1: Open Emesent Commander 1. Open Emesent Commander on your Android smartphone. 2. A dialog displays indicating that Commander is running on a smartphone. Tap **Close** to go to the main landing page. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(165).png) ### Step 2: Connect to your network 1. Tap **Connect**. The **Network Settings** window opens. 2. Confirm you are connected to the correct Hovermap and robot (if applicable). 3. To change the connection, tap **Change Network** or enter the host or IP address manually. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(166).png) ### Step 3: Select the mission type 1. Tap the **Non-Autonomous Mapping Mission** tile. 2. If a Mapping mode mission is already in progress, select whether to resume that mission or start a new one. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(167).png) > [!WARNING] > If an Autonomous mode mission is in progress, you can only monitor the mission in **Observer Mode**. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(169).png) ### Step 4: Complete pre-mission checks 1. On the **Pre-mission checks** page, read each inspection item. 2. Check and confirm each item as you complete it. 3. On the **Connectivity** page, confirm that the correct Hovermap and robot (if applicable) are connected, then tap **Continue**. ### Step 5: Set up the scan 1. On the **Scan setup** page, enter a name for the mission. 2. Tap **Start Scan**. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(170).png) ### Step 6: Start the mission 1. Once the pre-scan checks are complete and the scan has started, tap **Continue**. > [!WARNING] > For details on the Main View components, refer to the Emesent Commander User Interface article. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(172).png) ### Step 7: Stop the scan 1. When you have captured all required data, tap **Stop Scan** to end the mission. 2. Download your scan data from Hovermap. 3. Process your data using Emesent Aura. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(174).png) ## Outcome After completing these steps, the mapping mission is complete and your scan data is available on Hovermap, ready to be processed in Emesent Aura. ## Additional information - Split screen mode is supported on Android devices but is not recommended, as some features may not be available.