--- title: "Network Configuration" slug: "network-configuration" updated: 2026-08-24T05:26:38Z published: 2026-08-24T05:26:38Z canonical: "knowledge.emesent.com/network-configuration" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Network Configuration The Network configuration panel manages Hovermap’s network interfaces. It provides options to configure Wi-Fi access point settings (if supported) and to define wired network parameters. | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(25).png) | Select the arrow icon on the left of the panel header to expand or collapse the Network Configuration panel. | | --- | --- | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(26).png) ## Wi-Fi Settings **Enable Hovermap Wi-Fi** - Toggle to enable or disable the onboard Wi-Fi access point. - Wi-Fi is enabled by default. **New Wi-Fi Password / Confirm Wi-Fi Password** - Enter a new WPA-PSK-compliant password in both fields to change the default hovermap password. - Press Update Wi-Fi Password to apply. If Wi-Fi is disabled, it must be re-enabled using a wired connection. Ensure an Ethernet adapter is available before disabling. ## Wired Connection Settings The Wired connection settings section allows manual configuration of IPv4 networking. | Field | Description | | --- | --- | | **Address** | Enter the IPv4 address assigned to Hovermap. | | **Netmask** | Define the subnet mask for the wired interface. | | **DNS** | (Optional) Enter the DNS server IP address. | | **Gateway** | (Optional) Enter the default network gateway. | | **DHCP** | Toggle to allow Hovermap to automatically obtain an IP address. | | **Apply** | Saves and applies the entered wired connection settings. | ## Current Wired Connection The Current wired connection section displays the live status of Hovermap’s wired network interface. | Field | Description | | --- | --- | | **Address** | Shows the active IPv4 address (example: 192.168.2.115). | | **Netmask** | Shows the current subnet mask (example: 255.255.255.0). | | **Cable Connected?** | Indicates whether a physical connection is detected. A green tick confirms connection; a red cross indicates no cable detected. |