--- title: "Long Range Radio Quick Start Guide" slug: "long-range-radio-quick-start-guide" updated: 2026-10-13T22:45:53Z published: 2026-10-13T22:45:53Z canonical: "knowledge.emesent.com/long-range-radio-quick-start-guide" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Long Range Radio Quick Start Guide The Long Radio Radio (LRR) is a Hovermap accessory designed to extend data connectivity beyond typical Wi-Fi ranges. Tailored for Pilot Assist or Autonomous mode missions, it ensures uninterrupted communication between the operator and the Hovermap over extended distances. This capability is particularly beneficial for above-ground data capture applications such as aerial surveying and infrastructure inspection, where maintaining a reliable data link is crucial for mission success. > [!NOTE] > LRR can also be used in **Mapping** mode missions, provided the Hovermap is used on a drone. ## Specifications | **Dimensions and Weight** | | --- | | Air-Side | - 285g (with 915MHz antennas) - 260g (with 2.4GHz antennas) - 32mm x 94mm x 120mm (without antennas) | | Ground-Side | - 750g (with battery and 915MHz antennas) - 725g (with battery and 2.4GHz antennas) - 70mm x 70mm x 150mm (without antennas) | | **Operating Frequency and Power (Long Range Link)** | | --- | | 2.4GHz Model | **EU/UK:** 2447-2457MHz @ 20dBm EIRP **JP:** 2447-2457MHz @ 20dBm EIRP **AU/NZ/US/CA:** 2447-2457MHz @ 30dBm EIRP | | 915GHz Model | **AU/NZ/US/CA:** 916-926MHz @ 30dBm EIRP | | **Operating Frequency and Power (Ground-side Wi-Fi Access Point)** | | All Models | 2437-2447MHz @ 20dBm EIRP | | **Max Distance** | | 2.4GHz Model | **EU/UK:** 200m **JP:** 200m **AU/NZ/US/CA:** 900m | | 915GHz Model | **AU/NZ/US/CA:** 1500m | > [!NOTE] > All specified ranges are subject to environment and product configuration | **Throughput** | | --- | | All Models | up to 20Mbps | | **Data Encryption** | | All Models | 128-bit AES hardware data encryption | | **Power** | | --- | | Air-Side | 9-20V (15W) | | Ground-Side | 7.2V (14W) | | **Operating Temperature** | | All Models | -10°C to 45°C (14°F to 113° F) | | **Ingress Protection** | | All Models | Designed to IP65 | | Hovermap Compatibility | | --- | | All Models | ST/STX | | **Approved Regions** | | 2.4GHz Model | - EU/UK - Japan - Australia / New Zealand / USA / Canada | | 915GHz Model | - Australia / New Zealand / USA / Canada | ## Radio Setup ### Step 1: Air-Side Radio Setup ![Title: Air-side radio mounted on Hovermap - Description: Air-side radio mounted on Hovermap](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/base64-converted-image-1784770367431.png) **Step 1:** While Hovermap is powered off and unplugged, clean the bottom shroud of the Hovermap with a water-damped cloth. **STEP 2:** Unfasten the Smart Connector cover from Hovermap using the included 2mm hex key. **STEP 3:** Apply a threadlocker (Loctite 222 or equivalent) to the exposed threads of the four air-side radio mounting screws. **STEP 4:** Locate the air-side radio on the bottom of Hovermap as pictured. **STEP 5:** Fasten each of the four screws on the air-side radio by a small amount at a time, until the radio is securely mounted to the Hovermap. > [!NOTE] > Do not exceed a torque of 1 Nm. ### Step 2: Ground-Side Radio Setup ![Title: Ground-side radio front and back views with callout numbers - Description: Ground-side radio front and back views with callout numbers](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/base64-converted-image-1784770367439.png) | \| **1** \| Power button \| \| --- \| --- \| \| **2** \| Power LED \| \| **3** \| RSSi inidicator \| \| **4** \| Battery level indicator \| \| **5** \| Wi-Fi indicator \| | \| **6** \| Turbo LED \| \| --- \| --- \| \| **7** \| Turbo button \| \| **8** \| Antennas \| \| **9** \| Quick release \| | | --- | --- | | **1** | Power button | | **2** | Power LED | | **3** | RSSi inidicator | | **4** | Battery level indicator | | **5** | Wi-Fi indicator | | **6** | Turbo LED | | **7** | Turbo button | | **8** | Antennas | | **9** | Quick release | ![Title: Battery top view showing USB-C port, power button, and charging indicator - Description: Battery top view showing USB-C port, power button, and charging indicator](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/base64-converted-image-1784770367443.png) | **1** | USB-C charging port | | --- | --- | | - Use a standard USB-PD-compliant power - See the battery datasheet for requirements | | **2** | Battery Power button | | - Press and hold down for 5 seconds to turn the battery on/off - When connected to the radio, press and hold for 10 seconds to turn the radio on/off - See the battery datasheet for details | | **3** | Battery charging indicator | | - See the battery datasheet for details | #### Attaching the Battery The battery is attached to the radio using a simple locking mechanism. **STEP1:** Align the legs of the battery with the corresponding holes in the radio casing. **STEP 2:** Slide the battery in place then rotate the locking mechanism. The following shows the disassembled battery and radio unit. ![Title: Disassembled battery and radio unit showing alignment legs and electrical contacts - Description: Disassembled battery and radio unit showing alignment legs and electrical contacts](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/base64-converted-image-1784770367446.png) | **1** | Locking mechanism | | --- | --- | | **2** | Alignment leg | | **3** | Alignment hole | | **4** | Battery electrical contact | | **5** | Radio power electrical contact | #### Radio/Battery Buttons and Indicators The following tables provide information on the buttons and indicators for the Ground-Side radio and the battery. #### Button and Indicator Functions | Button/Indicator | Function | | --- | --- | | Power button (ON) | Switch the radio between the different power states | | Turbo button | Manually toggle between 1x1 and 2x2 MIMO operation for power savings | | Power LED | Indicates the power mode | | Turbo LED | Indicates whether the radio is in 1x1 or 2x2 MIMO mode | | RSSi Indicator | Indicates the RSSI on the LRR interface | | Battery indicator | Indicates the battery status | | Wi-Fi indicator | Shows whether Wi-Fi is on or off; it does not display signal strength | | Battery Power Button | Press and hold for 5 seconds to switch the battery on/off | #### Power States | Mode | Description | Power LED Status | | --- | --- | --- | | On | The radio fully on | On | | Off | The radio is in extremely low-power mode and only essential components remain on | Off | #### Radio Power Button Usage | Power Button Action | Operation | | --- | --- | | 4-second press | On → Off Off → On | #### LED Behavior for Different Operating States | Condition | Power LED | Wi-Fi Indicator | RSSi Indicator | | --- | --- | --- | --- | | Radio booting up | Slow blinking (1200ms interval) | Slow blinking (1200ms interval) | Slow blinking (1200ms interval) | | ON | Steady | See RSSi and Wi-Fi Indicators | See RSSi and Wi-Fi Indicators | #### RSSi and Wi-Fi Indicators | Status | RSSi Indicator | Wi-Fi Indicator | | --- | --- | --- | | Not associated | OFF | OFF | | Associated but the link was lost | Slow blink (1800ms interval) | Steady | | Connected | Steady; the number of bars illuminated is dependent on the RSSi | Steady | #### Turbo Button and LED Behavior | Button action | Mode | LED Behavior | | --- | --- | --- | | 2-second or longer press | 1x1 SISO -> 2x2 MIMO | Blinking (1200ms interval) until link is re-established -> Steady | | 2-second or longer press | 2x2 MIMO -> 1x1 SISO | Blinking (1200ms interval) until link is re-established -> Off | #### Battery Level Indicator | Battery Voltage | LED Indicator | | --- | --- | | > 7.84 V | Steady, Green | | 7.39 - 7.84 V | Steady, Yellow | | 6.5 - 7.39 V | Steady, Red | | < 6.5 V | Blinking (1200ms interval), Red | ### Step 3: Initial Setup **STEP 1:** Attach the battery to the Ground-Side radio. See Attaching the Battery **STEP 2:** Attach the antennas provided in your kit to the antenna connectors. **STEP 3:** Hold down the battery’s ON / OFF power button for 10 seconds. > [!NOTE] > - The Power LED will blink until the unit has fully booted, at which point it will be steady. > - While booting up, both the Wi-Fi and RSSi indicators will blink. They will switch to a slow blink after boot-up while waiting for a connection. If you have turned on any other radio, the RSSi indicator will eventually hold steady once the radios are connected. > - If you connect to the radio via Wi-Fi, then the Wi-Fi indicator will hold steady. ### Step 4: Field Setup ![Title: Field setup showing air-side and ground-side radio with antenna positions - Description: Field setup showing air-side and ground-side radio with antenna positions](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/base64-converted-image-1784770368867.png) | 1 | Antennas | | --- | --- | | 2 | Status Indicator LEDs | | 3 | Mounting Screws | | 4 | Heatsink | **STEP 1:** Mount the Hovermap as desired. **STEP 2:** Fasten the antennas on the Air-Side and Ground-Side radios (finger tight). **STEP 3:** Position the antennas as shown in the image above. **STEP 4:** Power on Hovermap. This will power on the Air-Side radio after 10 seconds. **STEP 5:** Separate and maintain a minimum of 5 m (above ground operations) or 10 m (underground operations - due to reflections) of clearance between the Air-Side and Ground-Side radios. **STEP 6:** Attach the battery to the Ground-Side radio. **STEP 7:** Long press the Ground-Side radio power button for 10 seconds. **STEP 8:** Within one minute of powering both radios, the LEDs on the air-side radio and the RSSi LEDs on the Ground-Side radio will change from blinking to solid, indicating a stable connection between both radios. **STEP 9:** Mount the Ground-Side radio to the desired operating platform (i.e. belt clip, tablet, or controller bracket). **STEP 10:** Open the Wi-Fi settings on your tablet and connect to the Long Range Radio (LRR) Wi-Fi network. LRR creates a Wi-Fi network containing the serial number of the Hovermap. For example, the network name for **ST0035** will be **lrr_st_0035**. > [!NOTE] > To enable or disable Turbo Mode, press and hold the **TURBO** button for 3 seconds. Activating Turbo Mode can improve radio performance in congested or obstructed environments, but it will slightly decrease the battery life. > [!NOTE] > Do not connect to the Hovermap network (st_xxxx). In Emesent Commander, a successful connection will show **LRR** next to the Wi-Fi signal strength indicator. The tablet will be unable to connect to the LRR Wi-Fi network until both radios have a stable connection. > [!NOTE] > Upon the first use of your LRR unit, it may take up to two minutes for the Wi-Fi network to display with the correct name.