--- title: "Installing Commander on Freefly Pilot Pro tablet" slug: "installing-commander-on-freefly-pilot-pro-tablet-1" updated: 2026-08-24T05:26:44Z published: 2026-08-24T05:26:44Z canonical: "knowledge.emesent.com/installing-commander-on-freefly-pilot-pro-tablet-1" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Installing Commander on Freefly Pilot Pro tablet Commander can be installed on the Freefly Pilot Pro tablet. There are two methods. See below. ## Option 1: Standard installation 1. Follow the [How to Install Emesent Commander](/v1/docs/installing-commander-on-an-android-tablet) installation guide. When connecting the USB-C cable to the tablet, connect the external storage device containing the downloaded .apk file to one of the USB-C ports on the controller, not the tablet itself. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(56).png) ## Option 2: Freefly Updater App (Freefly Pilot Pro tablet only) ### Step 1: Power On the PilotPro Tablet and Controller 1. Hold the power button on the PilotPro tablet for 4 seconds. - This will power on both the tablet and the controller. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(57).png) 1. Press the power button again when prompted on the controller to complete powering on. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(59).png) ### Step 2: Connect to the Internet 1. Enable Wi-Fi on the tablet. 2. Connect to a nearby wireless network or hotspot that has internet access. ### Step 3: Add the Emesent Repository 1. Open the Freefly Updater app. 2. Tap the Settings icon, then go to the Repositories menu. 3. Tap **New Repository** on the top right. 4. In the repository address field, enter the following address and click **ADD**: [http://freefly-updater.freeflysystems.com/v1_third_party/emesent/beta_repo/]( http://freefly-updater.freeflysystems.com/v1_third_party/emesent/beta_repo/) > [!WARNING] > The above address begins with **http://** not **https://** - you need to clear out the pre-entered text and enter the one above. 1. Once the new repository has been added, it is marked as "Unsigned" in red. - Ignore this and continue with the installation process. - Make sure the toggle for the repository is enabled. ### Step 4: Install Commander 1. Tap the back arrow and go to the **Latest** menu. 2. Pull down to refresh the list of apps. 3. Tap the **Commander** app entry to open it, then tap **Install**. 4. Follow the installation steps. 5. Wait for the installation to complete.