--- title: "Hovermap Feature Upgrade" slug: "hovermap-feature-upgrade" updated: 2026-08-24T05:26:55Z published: 2026-08-24T05:26:55Z canonical: "knowledge.emesent.com/hovermap-feature-upgrade" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Hovermap Feature Upgrade This article explains how to update the Hovermap feature file using a USB flash drive and the Hovermap Web UI. ## What you will need - Hovermap ST-X - USB flash drive containing the feature file update package - Commander ## Step 1: Attach the USB flash drive 1. Attach the USB flash drive to Hovermap. 2. Wait for the status LEDs to return to a slow, pulsing Emesent blue. ## Step 2: Open the Web UI 1. In Commander, select the hamburger button (☰) in the top-left corner to open the **Options** menu. 2. Select **Payload UI**. The Web UI opens. ## Step 3: Run the update wizard 1. Select **Upgrade Firmware**. The **Hovermap Upgrade** dialog box appears. 2. Select **Next**. Hovermap confirms that no BSP is found. 3. Select **Next**. Hovermap confirms that no upgrade image is found. 4. Select **Next**. Hovermap confirms that a features update package has been found. 5. Select **Next**. The system spends 2 to 3 minutes checking the integrity of the Hovermap feature image. ## Step 4: Install the feature file 1. When the **Ready to start upgrade** page appears, remove the USB flash drive. 2. Select **Install**. ## Outcome Hovermap restarts automatically and the status LEDs return to a slow, pulsing Emesent blue. This process takes 20 to 30 minutes.