--- title: "Critical error or erratic drone behavior" slug: "hovermap-emergency-procedures" updated: 2026-08-24T05:26:38Z published: 2026-08-24T05:26:38Z canonical: "knowledge.emesent.com/hovermap-emergency-procedures" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Critical error or erratic drone behavior ## Switch to drone control mode > [!CAUTION] > This procedure should only be used in an emergency. Avoid flying in drone control mode unless you are an experienced pilot. ## Procedure ### Step 1: Identify the emergency - If a critical error (in red) appears, or if your drone is behaving erratically, do the following: ### Step 2: Switch to drone control - Switch to drone control by changing the flight mode switch out of Hovermap mode. ### Step 3: Select the appropriate flight mode - If GPS is available, switch to the appropriate position hold mode. - **For DJI drones:** If GPS is not available, switch to Atti mode (for DJI). - **For Freefly Drones:** Hovermap ST-X will automatically revert to Altitude mode if there is no adequate GPS available. ### Step 4: Return home safely - Manually fly the drone home safely. ### Step 5: Maintain control awareness - Keep a close eye on your drone, as the controls will be sensitive and it will move at greater speed. - Report the incident to Emesent. Please refer to Report an aircraft incident or near-miss. For more detailed information on errors, refer to the Warnings and Notifications article in Knowledge Base. > [!TIP] > After completing these steps, the drone will be under direct pilot control, allowing you to respond to the emergency and recover the aircraft safely.