--- title: "GX1 Indicators" slug: "gx1-indicators" updated: 2026-10-13T22:44:00Z published: 2026-10-13T22:44:00Z canonical: "knowledge.emesent.com/gx1-indicators" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # GX1 Indicators # GX1 Control Panel lights and states The GX1 Control Panel shows device state through the power button light, the four-segment LED bar, and three status icons. The status indicator ring on the body carries the same colour language for mission and system state. This article lists the colour and pattern each element shows in every state. Commander remains the primary operator interface. These lights are the on-device confirmation of the same state. ## Colours and patterns The GX1 uses these colours. Cyan is the healthy or active colour, stone marks booting, and pure red marks an error or critical condition. | Colour | Hex | Use | | --- | --- | --- | | Cyan | #03E1FF | Healthy, ready, or active. | | Stone (white) | #E8E9E6 | Booting and software update. The power button uses a tuned teal (#64E8E6) that reads as stone on that LED. | | Pure red | #F50000 | Error or critical condition. | | Orange | Not specified | Power button during powering on and off. Firmware-controlled and outside the Cortex LED map. | | Off | None | Element inactive. | Each behaviour is a combination of colour and pattern: - **Solid**: steady, no animation. - **Breathe**: smooth fade up and down over 4 s. - **Wipe**: the colour sweeps along the element as a moving chase. - **Flashing**: on and off. - **Fast blink**: on and off over 0.5 s. - **Medium blink**: on and off over 1 s. ## State reference Each row is a device or mission state. Each column is a Control Panel element or the status indicator ring. - **N/A** means the element is not driven by this state. It may still show another status from its own condition, for example battery level, Wi-Fi health, or USB activity. - **Off** means the element is inactive in that state. > [!NOTE] > The **LED bar** always shows remaining battery in cyan whenever the unit is on, filling in 10 % steps. The **power button** stays solid cyan for every state from ready onward, so it does not change through the mission phases. | State | Power button | LED bar | Wi-Fi icon | Download icon | Info icon | Status indicator ring | | --- | --- | --- | --- | --- | --- | --- | | Off, no battery | Off | Off | Off | Off | Off | Off | | Off, battery installed | See note | Off | Off | Off | Off | Off | | Powering on (button held, off) | Orange | Gradual ascending fade, 1 to 3 lights | Off | Off | Off | Off | | Booting | White (stone), breathe | Off | Off | Off | Off | White (stone), breathe | | Ready, idle (on) | Cyan, solid | Battery level, cyan | N/A | N/A | N/A | Cyan, breathe | | Mission pre-checks | Cyan, solid | N/A | N/A | N/A | N/A | Cyan, wipe | | Mission startup | Cyan, solid | N/A | N/A | N/A | N/A | Cyan, wipe | | Scanning (mission nominal) | Cyan, solid | N/A | N/A | N/A | N/A | Cyan, wipe | | Stopping scan (mission shutdown) | Cyan, solid | N/A | N/A | N/A | N/A | Cyan, fast blink | | Pre-checks failed | Cyan, solid | N/A | N/A | N/A | N/A | Red, medium blink | | Mission failsafes | Cyan, solid | N/A | N/A | N/A | N/A | Red, medium blink | | Offloading (data transfer) | Cyan, solid | N/A | N/A | Cyan, fast blink | N/A | Cyan, wipe | | Software update | Cyan, solid | N/A | N/A | N/A | N/A | White (stone), breathe | | Powering off (button held, on) | Orange | White, clears one by one, right to left | Off | Off | Off | N/A | | Shutting down | White | Off | Off | Off | Off | Off | | Boot failure | Off | Off | Off | Off | Off | Red, solid (see note) | | USB connected, idle | N/A | N/A | N/A | Cyan, solid | N/A | N/A | | Wi-Fi healthy | N/A | N/A | Cyan, solid | N/A | N/A | N/A | | Wi-Fi error | N/A | N/A | Red, solid | N/A | N/A | N/A | | Battery critical | N/A | N/A | N/A | N/A | Red, solid | Red, medium blink | | Storage critical | N/A | N/A | N/A | N/A | Red, solid | Red, solid | | Data recording stopped | N/A | N/A | N/A | N/A | Red, solid | Red, solid | ## Power button The **power button** is the only button on the Control Panel. - Press the button during a mission to stop the mission. - Hold the button for 3 s while off to power the unit on. The unit then enters the booting state. - Hold the button for 3 s while on to power the unit off. The LED bar clears one by one from right to left, then the unit enters low-power standby. Power-on and power-off are handled in firmware. The power button shows orange during these holds, which is outside the Cortex LED map. > [!NOTE] > On the GX1 the power button does not start a mission. Start a mission from the app or frontend. This differs from older Hovermap hardware, where the button starts a mission. ## Unverified behaviour > [!WARNING] > The following behaviours are firmware-controlled or carried over from earlier documentation, and are not present in the current Cortex LED map. Confirm them against firmware before publishing. > > - The power button orange during powering on, powering off, and while off with a battery installed. > - Boot failure showing solid red on the status indicator ring. ## Related articles - [Understand GX1 error states](/v1/docs/understand-gx1-error-states) - [GX1 status indicator ring](/v1/docs/status-indicator-ring) - [Power GX1 on and off](/v1/docs/power-gx1-on-and-off) ---