--- title: "Replace the GX1 Backpack Harness Pole" slug: "gx1-harness-pole-replacement-kit" description: "Learn how to replace the Inner Pole on your GX1 Backpack Harness with this step-by-step guide, ensuring a secure and functional setup." updated: 2026-08-24T05:26:38Z published: 2026-08-24T05:26:38Z canonical: "knowledge.emesent.com/gx1-harness-pole-replacement-kit" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Replace the GX1 Backpack Harness Pole This article explains how to replace the **Inner Pole** on the **GX1 Backpack Harness**. ## What you will need The replacement kit contains these items. | Item | Description | | --- | --- | | Replacement **Inner Pole** | The new inner tube for the **Telescoping Pole**, with the **Survey Thread** at its top end. | | 2 **End-Stops** | Plastic stops that limit the travel of the **Inner Pole** in the **Outer Pole**. | | M4 x 16 Cap Head Screw | Clamps the two halves of the **Pole Clamp** onto the **Outer Pole**. | | M4 Nyloc Nut | Lock nut for the M4 x 16 screw, on the underside of the **Pole Clamp**. | | 3 mm Hex Key | Tool for the **Pole Clamp** screw and the **Cam Lock Lever** pivot nut. | These are also necessary, and are not in the kit. - A **GX1 Backpack Harness** - A large flat surface, such as a table ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-HDSZB2H5.png) ## Procedure ### Step 1: Prepare the harness The **GX1 Case** must not be mounted on the harness. 1. Put the harness on a large flat surface so that the straps face up. 2. Use the 3 mm hex key to remove the **Pole Clamp** screw closest to the body of the harness. 3. Collect the M4 nyloc nut from the underside and put it with the screw in a safe place. | ![The GX1 Backpack Harness flat on a table. The shoulder pads and straps face up.](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-1786942416530.png) | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-I3HZX2DK.png) | | --- | --- | ### Step 2: Turn the harness over and extend the Inner Pole 1. Turn the **GX1 Backpack Harness** over so that the straps face down. 2. Open the **Cam Lock Lever**. 3. Extend the **Inner Pole** part way. | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-75X1K2NB.png) | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-N1Y9E3RH.png) | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-AIMNBIKF.png) | | --- | --- | --- | ### Step 3: Release the Pole Clamp from the Outer Pole The **Pole Clamp** has a notch that keys into the **Outer Pole**. 1. Use the fingers to spread the **Pole Clamp** open gently. 2. Pull the **Pole Clamp** away from the **Outer Pole** at the same time. 3. Slide the **Pole Clamp** off the end of the **Outer Pole** after the notch releases. | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-MDH5PI15.png) | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-FQK26RUT.png) | | --- | --- | ### Step 4: Remove the old Inner Pole 1. Pull the **Inner Pole** and the **Pole Clamp** completely out of the **Outer Pole**. 2. Remove the two **End-Stops** from the end of the **Inner Pole**. 3. Keep the **Thread Cap with Tether** secured around the **Outer Pole** during **Inner Pole** removal. If the **Thread Cap with Tether** comes off, thread the **Outer Pole** through the loop in the **Tether** before the next step. | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-1786944217319.png) | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-1786944247048.png) | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-VMM1I51F.png) | | --- | --- | --- | ### Step 5: Remove the Pole Clamp from the Inner Pole 1. Slide the **Pole Clamp** off the **Inner Pole**. 2. Put the **Pole Clamp** aside for use on the replacement **Inner Pole**. > [!CAUTION] > Dispose of the old **Inner Pole** now. This prevents a mix-up with the replacement **Inner Pole**. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-52DD5MF7.png) ### Step 6: Install the Pole Clamp on the replacement Inner Pole 1. Slide the **Pole Clamp** onto the replacement **Inner Pole**, **Cam Lock Lever** end first, past the **MAX** mark. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-1787013345748.png) ### Step 7: Install the End-Stops on the replacement Inner Pole 1. Install the two **End-Stops** onto the end of the replacement **Inner Pole**. 2. Put the square tab of each **End-Stop** into a square slot. 3. Make sure both **End-Stops** sit flush, because the square tab is not centered. | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-1787025650392.png) | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-USSO8KIL.png) | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-ALPA0V0Z.png) | | --- | --- | --- | ### Step 8: Insert the Inner Pole and position the Pole Clamp 1. Insert the replacement **Inner Pole** into the **Outer Pole**, with the **End-Stops** attached. 2. Spread the **Pole Clamp** open gently. 3. Slide the **Pole Clamp** over the **Outer Pole**. 4. Turn the **Pole Clamp** until the square tab on its inner surface locks into the square socket. | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-5255GCLA.png) | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-HOX1X26W.png) | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-0WCOX5O2.png) | | --- | --- | --- | ### Step 9: Install and tighten the Pole Clamp screw > [!WARNING] > Tighten the **Pole Clamp** screw to finger tight only, approximately 1 Nm. Too much torque can damage the **Pole Clamp**. 1. Put the M4 nyloc nut into the **Pole Clamp**. 2. Hold the nut in position with a finger. 3. Put the M4 screw into the **Pole Clamp**. 4. Engage the thread of the screw in the M4 nyloc nut. 5. Tighten the screw with the short end of the 3 mm hex key as a handle. 6. Make sure that the two halves of the **Pole Clamp** touch together. | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-T9B4KBJV.png) | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-5HAQRJN4.png) | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-CMTQKKE3.png) | | --- | --- | --- | ### Step 10: Check the Inner Pole and End-Stops 1. Extend the **Inner Pole** past the **MAX** mark. 2. Pull the **Inner Pole** firmly. 3. Make sure that the **Pole Clamp** is seated and that the **End-Stops** are correct. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-X7I4W3ME.png) > [!WARNING] > If the **Inner Pole** does not stay in the **Outer Pole**, remove it and install the **End-Stops** again. ### Step 11: Close the Cam Lock Lever 1. Close the **Cam Lock Lever**. 2. Make sure that the **Inner Pole** is clamped firmly. 3. To adjust the compression, turn the screw on the **Cam Lock Lever** pivot nut with the hex key. | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-2A4K953Q.png) | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-LMG2Y2DZ.png) | | --- | --- | ## Outcome The **GX1 Backpack Harness** has a replacement **Inner Pole**. The **Inner Pole** clamps firmly at any extension up to the **MAX** mark, and the harness is ready for use. ## Additional information - The kit contains spare **End-Stops**. Use a spare if an original **End-Stop** is damaged.