---
title: "Export RINEX data from an Emlid reciever"
slug: "export-rinex-data-from-an-emlid-reciever"
updated: 2026-08-24T05:26:44Z
published: 2026-08-24T05:26:44Z
canonical: "knowledge.emesent.com/export-rinex-data-from-an-emlid-reciever"
stale: true
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt
> Use this file to discover all available pages before exploring further.

# Export RINEX data from an Emlid reciever

This article explains how to export RINEX data from an Emlid receiver for use in a PPK Georeferencing workflow. Emlid receivers output RINEX natively. No format conversion is required.

## Prerequisites

- Emlid receiver with a completed RINEX log
- Emlid Flow app installed on a device connected to the receiver

## Procedure

### Step 1: Export data from the receiver

1. Open **Emlid Flow** on the device.
2. Navigate to **Logging**.
3. Stop the active RINEX log.
4. Select the completed log file for the session.
5. Export or transfer the files to a desktop computer.

### Step 2: Extract the RINEX files

1. Locate the exported file on the desktop. Emlid exports RINEX data as a zip archive.
2. Extract the zip archive. The extracted folder contains the RINEX files.

## Outcome

After completing these steps, the extracted RINEX files are ready for post-processing in Emlid Studio.

## Next steps

See [Process RINEX files in Emlid Studio](/v1/docs/process-rinex-files-in-emlid-studio).