--- title: "DJI Notifications" slug: "dji-notifications" updated: 2026-08-24T05:26:55Z published: 2026-08-24T05:26:55Z canonical: "knowledge.emesent.com/dji-notifications" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # DJI Notifications ## Critical | Notification | Description | Recommended Action | | --- | --- | --- | | **Hovermap is using a different robot than the connected remote control** | The RC and the Hovermap are connected to different, incompatible models. | Ensure the correct Hovermap is connected. If the problem persists, land and restart the mission. | | **Take off failed** | DJI reported that take off has failed for an unknown reason. | Investigate using the DJI Pilot app. | | **DJI: Critical warnings present** | DJI is reporting a critical issue which needs investigation. | Land as soon as possible. Investigate using the DJI Pilot app. | | **DJI configuration changes: Multiple flight modes disabled** | The Multiple Flight Modes setting could not be enabled, or it is currently trying to update to being enabled but the changes have not been applied yet. | The Multiple Flight Modes setting needs to be enabled for safe flight control with Hovermap. | | **DJI configuration changes: Enabling Multiple flight modes failed** | Attempting to enable the Multiple Flight Modes setting with DJI failed. | | | **DJI configuration changes: Novice mode enabled** | The Novice mode setting is reported as enabled. | The Novice mode setting needs to be disabled for safe flight control with Hovermap. | | **DJI configuration changes: Downward vision positioning enabled** | The Downward vision positioning setting is reported as enabled. | The Downward vision positioning setting needs to be disabled for safe flight control with Hovermap. | | **DJI configuration changes: Precision landing enabled** | The Precision landing setting is reported as enabled. | The Precision landing setting needs to be disabled for safe flight control with Hovermap. | | **DJI configuration changes: Changing collision avoidance state failed** | Attempting to change the state of the Collision avoidance setting through DJI failed. | | | **DJI configuration changes: Changing RTH obstacle avoidance state failed** | Attempting to change the state of the RTH obstacle avoidance setting through DJI failed. | | | **DJI configuration changes: Landing protection enabled** | The Landing protection setting is reported as enabled. | The Landing protection setting needs to be disabled for safe flight control with Hovermap. | | **DJI configuration changes: Changing landing protection state failed** | Attempting to change the state of the Precision Landing setting through DJI failed. | | | **DJI configuration changes: Enabling Landing protection failed** | Attempting to enable the Landing protection setting with DJI failed. | | | **Battery overheating** | DJI has reported that the batteries in the drone are too hot. Robot may shut down mid-air. | Land immediately. | ## Warning | Notification | Description | Recommended Action | | --- | --- | --- | | **DJI: App is not registered** | The DJI SDK registration could not be completed, which means you are unable to connect to the DJI RC. | Connect to the internet and restart the application to continue. | | **DJI: Low GPS signal** | GPS signal is poor, or satellite search produced an error. | Move the robot to an open area to use GPS. | | **DJI: Warnings present** | DJI reported a warning which needs investigation. | Investigate using the DJI Pilot app. | | **DJI: Flight Status unknown** | The DJI flight assistant could not be contacted on the DJI remote control. | Reconnect the robot or restart the app if this persists. | | **DJI configuration changes: Battery critical threshold different** | The critical battery threshold reported by DJI is different to the expected values. | | | **DJI configuration changes: Setting battery critical threshold failed** | Attempting to set the new critical battery threshold with DJI failed. | | | **DJI configuration changes: Battery critical warning different** | The warning battery threshold reported by DJI is different to the expected values. | | | **DJI configuration changes: Setting battery warning threshold failed** | Attempting to set the new warning battery threshold with DJI failed. | | | **DJI configuration changes: Smart RTH enabled** | The Smart RTH setting is reported as being enabled by DJI. | The Smart RTH setting needs to be disabled for safe flight control with Hovermap. | | **DJI configuration changes: Disabling Smart RTH failed** | Attempting to disable the Smart RTH setting through DJI failed. | | | **Geofence could not be disabled** | DJI has detected low GPS signal, reported after the drone has been armed or while airborne. | Connect the RC to the tablet. | ## Caution | Notification | Description | Recommended Action | | --- | --- | --- | | **DJI: Low GPS signal** | GPS signal is poor, or satellite search produced an error. | Move the robot to an open area to use GPS. | | **Drone downward sensors need to be covered with stickers to resolve the current DJI error** | DJI reported that its sensors have detected a problem. This is likely caused by the downward sensors being uncovered during takeoff. | | | **Altitude limited airspace** | DJI reported that there is a maximum altitude limit which must be observed in the current flight area. Pilots must not exceed the altitude limit without authorisation (e.g. from CASA). | Ensure you have the appropriate approval to fly above this limit from the local aviation regulatory body. | | **DJI Visual Positioning is active** | DJI reported that the in-flight vision positioning system has been activated due to low GPS for navigation. | Use DJI Pilot app to switch off if required. | | **DJI configuration changes: Multiple flight mode settings unknown** | The current Multiple Flight Modes setting could not be determined from DJI. | | | **DJI configuration changes: Battery critical threshold unknown** | The current critical battery threshold could not be provided by DJI. | | | **DJI configuration changes: Battery warning threshold unknown** | The current warning battery threshold could not be provided by DJI. | | | **DJI configuration changes: Smart RTH status unknown** | The current Smart RTH setting could not be provided by DJI. | | | **DJI configuration changes: Novice mode setting unknown** | The current Novice mode setting could not be provided by DJI. | | | **DJI configuration changes: Disabling novice mode failed** | Attempting to disable the Novice mode setting through DJI failed. | | | **DJI configuration changes: Downward vision positioning status unknown** | The current Downward vision positioning setting could not be provided by DJI. | | | **DJI configuration changes: Changing downward vision positioning failed** | Attempting to change the state of the Downward vision positioning setting through DJI failed. | | | **DJI configuration changes: Changing vision assisted positioning state failed** | Attempting to change the state of the Vision assisted positioning setting through DJI failed. | | | **DJI configuration changes: Precision landing status unknown** | The current Precision Landing setting could not be provided by DJI. | | | **DJI configuration changes: Changing active obstacle avoidance state failed** | Attempting to change the state of the Active obstacle avoidance setting through DJI failed. | | | **DJI configuration changes: Changing upward collision avoidance state failed** | Attempting to change the state of the Upwards collision avoidance setting through DJI failed. | | | **DJI configuration changes: Changing RTH obstacle avoidance state failed** | Attempting to change the state of the RTH obstacle avoidance setting through DJI failed. | | | **DJI configuration changes: Changing horizontal vision obstacle avoidance failed** | Attempting to change the state of the Horizontal vision obstacle avoidance setting through DJI failed. | | | **DJI configuration changes: Landing protection status unknown** | The current Precision Landing setting could not be provided by DJI. | | | **DJI configuration changes: Changing advanced pilot assistance state failed** | Attempting to change the state of the Advanced pilot assistance setting through DJI failed. | | | **Battery high age or wear** | DJI has reported that the drone’s batteries have a high level of age or wear. | | | **Battery too cold** | DJI has reported that the drone’s batteries are too cold. | | | **Battery cell broken** | DJI has reported that one of drone’s batteries has a broken cell. | | | **Geofence enabled** | The Geofence applied by DJI is active. | Use DJI Pilot to disable geofence. | | **Geofence disabled** | The Geofence applied by DJI is not active. | Use DJI Pilot to enable geofence. |