--- title: "Connecting and configuring GX1" slug: "connecting-and-configuring-gx1" status: "update" updated: 2026-08-24T05:23:45Z published: 2026-08-24T05:27:12Z canonical: "knowledge.emesent.com/connecting-and-configuring-gx1" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Connecting and configuring GX1 This section covers how to connect GX1 to Commander and configure it for cellular and GNSS correction networks. **This section covers:** - [**Connect GX1 to Commander**](/v1/docs/connect-gx1-to-commander): How to pair GX1 with Commander and join its Wi-Fi network. - [**Install a SIM card in GX1**](/v1/docs/install-a-sim-card-in-gx1): How to install a SIM card in GX1 for cellular connectivity. - [**Configure SIM settings in Commander**](/v1/docs/configure-sim-settings-in-commander): How to enter carrier APN and network settings. - [**Configure an NTRIP profile**](/v1/docs/configure-an-ntrip-profile): How to set up an NTRIP profile to receive GNSS corrections. - [**Set the GX1 camera anti-banding frequency:**](/v1/docs/set-the-gx1-camera-anti-banding-frequency) How to set the anti-banding frequency to prevent image flicker under artificial lighting.