--- title: "Configure SIM settings" slug: "configure-sim-settings-in-commander" updated: 2026-08-24T05:26:55Z published: 2026-08-24T05:26:55Z canonical: "knowledge.emesent.com/configure-sim-settings-in-commander" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Configure SIM settings This article explains how to configure SIM settings in Commander to enable mobile data connectivity on the scanner. Most mobile network providers do not require specific APN settings, so this procedure is only necessary when a provider does. ## What you will need - Active SIM card with a mobile data plan. - APN details from the mobile network provider. > [!NOTE] > Contact a [regional Emesent partner](https://www.emesent.com/resellers) or [Emesent](https://www.emesent.com/client-support/) directly for help choosing the best SIM. ## Procedure ### Step 1: Open Scanner Settings 1. Open Commander and tap **Options Menu** on the left side of the screen. 2. Scroll down and tap **Scanner Settings** to open the settings screen. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(726).png) ### Step 2: Open Scanner SIM Settings 1. Ensure the **Scanner SIM Card** toggle is enabled. 2. Tap **Scanner SIM Settings** to open the setup screen. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(729).png) ### Step 3: Configure APN settings 1. Enter the APN in the **APN** field. 2. Select the appropriate option from the **Authentication Type** field. 3. Tap **Save** to apply the settings. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(733).png) ### Step 4: Confirm the connection 1. Confirm that a mobile reception icon appears in the **System Indicators** bar at the top of the screen. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(728).png) ## Outcome The scanner is connected to the mobile network and can receive RTK correction data. ## Additional information - APN details are provided by the mobile network provider. Contact the provider to confirm the correct settings. - For further assistance, see the **Scanner Settings** troubleshooting article. ## Troubleshooting If **Scanner Settings** does not appear after tapping **Options Menu**, the Android device is not connected to the GX1 Scanner. Check that the GX1 Scanner is powered on and connected before opening Commander.