--- title: "Configure automatic people masking" slug: "configure-automatic-people-masking" updated: 2026-08-24T05:26:44Z published: 2026-08-24T05:26:44Z canonical: "knowledge.emesent.com/configure-automatic-people-masking" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Configure automatic people masking This article explains how to configure automatic people masking, the Aura 2.2 feature that detects and removes people from colorized point clouds and 360 panoramic images during processing. For an overview of what the feature does and the outcomes it produces, see [Understanding automatic people masking](/v1/docs/people-masking). ## What you will need - Scan data captured with an Emesent scanner and offloaded to a processing computer - Aura 2.2 or later ## Procedure ### Step 1: Open processing settings for the scan 1. In Aura, select the scan to process. 2. Select **Colorize** or **Extract 360 images** depending on the output required. 3. The **Processing Settings** panel opens. ### Step 2: Configure automatic people masking 1. In the **Processing Settings** panel, locate the **Image masking** section. 2. Confirm **Automatic people masking** is enabled. The setting is enabled by default in Aura 2.2. 3. To disable detection for this scan, set **Automatic people masking** to off. 4. For 360 image extraction, set **Blur masked regions** to on if blurred output is required instead of a solid mask. ### Step 3: Start processing 1. Confirm all other processing settings are correct for the scan. 2. Select **Start**. 3. Aura processes the scan and applies the configured masking to the output. ## Outcome Detected people are removed from colorization and 360 panoramic image outputs according to the selected settings. People masking does not remove people from the point cloud itself. Their points may remain, colored from background frames where they were not present. To remove people from the point cloud, enable the Moving object filter. ## Additional information - Automatic people masking detects people only. Vehicles, equipment, and other objects are not masked. - Detection accuracy depends on lighting, distance from the scanner, image resolution, and how much of the person is visible in the source frames. GX1 detection performs better at higher image resolution settings. Partially occluded people may not always be detected. - Operator masking templates (right-handed, left-handed, centre) remain available when automatic people masking is disabled. Use a template to mask the operator with a fixed region instead of automatic detection. - Enabling automatic people masking increases processing time by approximately 30-50%, depending on scan size and the masking settings selected. Processing time on ST-X scans is typically longer than on GX1 scans. ## Related articles - [Understanding automatic people masking](/v1/docs/people-masking) - [Colorizing scan data](/v1/docs/colorization-initial-setup-guide) - [Extract 360 images](/v1/docs/360-panoramic-images) - [Aura 2.2 release notes](/v1/docs/release-notes)