--- title: "Configure an NTRIP profile" slug: "configure-an-ntrip-profile" updated: 2026-08-24T05:26:55Z published: 2026-08-24T05:26:55Z canonical: "knowledge.emesent.com/configure-an-ntrip-profile" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Configure an NTRIP profile This article explains how to add an NTRIP profile in Commander. Use this procedure to create an NTRIP profile that can be selected when starting a scan, to enable RTK corrections for accurate georeferencing during scan processing. > [!NOTE] > Mobile data on the GX1 is used only for retrieving RTK corrections through NTRIP. The GX1 does not send any other data over the mobile connection. See [GX1 network interfaces](/v1/docs/gx1-network-interfaces) for the full network interface reference. If a stable correction link during the scan is not possible, PPK georeferencing is an alternative. See [Understanding PPK Georeferencing](/v1/docs/understanding-ppk-georeferencing) for more information. ## What you will need - A GX1 Scanner. - Commander installed on a supported device. - A SIM card inserted and configured in the GX1 Scanner. - NTRIP credentials from the correction service provider, including the server address, port, mountpoint, username, and password. ## Procedure > [!NOTE] > An NTRIP profile can also be added during the Mapping Mission workflow as part of scan setup. See [Start a GX1 scan in Commander](/v1/docs/start-a-gx1-scan-in-commander). ### Step 1: Open Scanner Settings 1. Open Commander and tap **Options Menu** on the left side of the screen. 2. Scroll down and tap **Scanner Settings**. 3. Check that the **Scanner Settings** screen is displayed. If it does not appear, see [Troubleshooting](/v1/docs/configure-an-ntrip-profile#troubleshooting) below. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(726).png) ### Step 2: Create a new NTRIP profile 1. On the **Scanner Settings** screen, tap **+New** under **NTRIP Profile**. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(734).png) ### Step 3: Enter the correction service details 1. Enter a name for the profile in the **Profile Name** field. Choose a name that identifies the correction service. 2. Enter the following details from the correction service provider: | Field | Description | | --- | --- | | **Address** | The server address of the NTRIP caster. | | **Port** | The port number of the NTRIP caster. | | **Mountpoint** | The mountpoint for the correction stream. | | **Username** | The username provided by the correction service provider. Currently limited to a maximum of 20 characters. | | **Password** | The password provided by the correction service provider. | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(735).png) ### Step 4: Save and connect 1. Tap **Save and Connect**. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(736).png) ### Step 5: Check the profile is saved 1. Under **NTRIP Profile** in **Scanner Settings**, tap the profile selector to view the list of saved profiles and check the new profile appears. | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-1785212102853.png) | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image-1785212126989.png) | | --- | --- | ## Edit an existing NTRIP profile To change a saved NTRIP profile (for example, to update the password or mountpoint): 1. Open Commander and navigate to **Scanner Settings**. 2. Under **NTRIP Profile**, select the profile to edit. 3. Tap the edit button. 4. Update the required fields, then tap **Save**. When the selected NTRIP profile is changed or edited, the RTK information on the **Scanner Settings** screen automatically refreshes to reflect the active profile. ## Outcome The NTRIP profile is saved in Commander and is available to select when starting a scan, to enable RTK corrections for accurate georeferencing during scan processing. If a stable correction link during the scan is not possible, see [Get started with PPK Georeferencing](/v1/docs/get-started-with-ppk-georeferencing) as an alternative. ## Troubleshooting If **Scanner Settings** does not appear after tapping **Options Menu**, the Android device is not connected to the GX1 Scanner. Check that the GX1 Scanner is powered on and connected before opening Commander. If **Scanner Settings** appears but displays an "Internet not available" error, the GX1 Scanner does not have an active internet connection. Check the following: - The GX1 Scanner may not have finished starting up. Wait for it to fully start, then try again. - The SIM card may not be seated correctly in the GX1 Scanner. Remove and reinsert the SIM card. - There may be no mobile reception in the current location. Move to an area with coverage and try again.