--- title: "Configuration & Setup" slug: "configuration-setup-1" updated: 2026-08-24T05:26:38Z published: 2026-08-24T05:26:38Z canonical: "knowledge.emesent.com/configuration-setup-1" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Configuration & Setup This article explains how to configure the Boston Dynamics Spot robot to communicate with Hovermap. The procedure pairs Hovermap to Spot through the Spot app, authorises the Hovermap payload, and creates the Start Scan and Stop Scan actions for scanning missions. > [!NOTE] > Before proceeding, ensure familiarity with operating the Spot robot. ## What you will need - A Boston Dynamics Spot robot with the Hovermap Spot Cage installed (see **Install the Hovermap Spot Cage**). - The Spot controller with the Spot app installed. - A Boston Dynamics admin account with credentials to access the Admin Console. - Optional: Long Range Radio (LRR) hardware and its Wi-Fi network for extended range operations. ## Procedure ### Step 1: Pair Hovermap to Spot 1. Ensure all cables are connected securely. 2. Power on the Spot robot and Hovermap. If Hovermap does not power on automatically, switch it on manually. 3. Launch the **Spot** application from the controller. ![Spot application launch screen](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/configuration--setup-image-mc4nn01n.png) 4. Go to the **My Robots** page. The page lists all robots with their corresponding networks shown alongside each robot name. ![My Robots page with robots and networks listed](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/configuration--setup-image-n2x97aq9.png) 5. Tap **Add New Robot** at the bottom of the list. 6. Select a Hovermap network to connect to on the left, then view the list of detected robots on the right side. ![Hovermap network selection with detected robots listed](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/configuration--setup-image-onvnpopc.png) 7. Choose a robot from that list, then tap **Add Robot**. 8. On the **My Robots** page, tap the newly added robot to log in. ![Tapping the newly added robot to log in](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/configuration--setup-image-xpyi8cgr.png) 9. Select **Power On**. ![Power On selection in the Spot app](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/configuration--setup-image-yy67ldmn.png) 10. Once Hovermap and Spot are powered on, a flashing amber alert appears on the Status Bar for the Platform Status, reporting an **Active Service Fault - Unauthorized Payload**. This indicates that Hovermap has been successfully detected and requires authorisation. ![Unauthorized Payload alert on the Status Bar](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/configuration--setup-image-dzijggtv.png) ### Step 2: Authorise the Hovermap payload 1. Tap the **Settings Menu** at the top left, then navigate to the **Admin Console**. 2. Enter the credentials when prompted. 3. Select the **Payloads** icon. ![Payloads icon in the Admin Console](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/configuration--setup-image-uj4wkfqt.png) 4. Scroll down until the Hovermap payload is shown, then tap **Authorize**. ![Hovermap payload with the Authorize option](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/configuration--setup-image-5mjhwvgz.png) ![Hovermap payload authorised](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/configuration--setup-image-gdu39p4d.png) ### Step 3: Create the Start Scan action 1. In the **Settings Menu**, navigate to **Settings** > **Actions** to configure the Start and Stop Scan actions. ![Settings > Actions in the Spot app](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/configuration--setup-image-ee824g4m.png) 2. Under **Custom Inspections**, tap **Create New Action**. ![Create New Action button under Custom Inspections](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/configuration--setup-image-gnwr8yyo.png) 3. Select **Empty Inspection** as the template action from the dropdown. ![Empty Inspection template selected from the dropdown](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/configuration--setup-image-828bfuc8.png) 4. Enter a name in the **Inspection Editor** (for example, "Start Scan"). ![Naming the Start Scan action in the Inspection Editor](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/configuration--setup-image-nr3etsck.png) 5. Select **Remote GRPC**, then select **Start Hovermap**. ![Remote GRPC and Start Hovermap selected](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/configuration--setup-image-ccv9vc59.png) 6. Change the **Robot Body Control** parameter from the default **Body Pose** setting to **No Control**. ![Robot Body Control set to No Control](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/configuration--setup-image-646i6nds.png) ![Robot Body Control change confirmed](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/configuration--setup-image-e72fkqz5.png) 7. Tap **Save** on the top right of the **Inspection Editor** window. ### Step 4: Create the Stop Scan action 1. In the **Settings Menu**, navigate to **Settings** > **Actions**, then select **Create New Action**. 2. For the Stop Scan action, use **Start Scan** as the template. ![Start Scan selected as the template for Stop Scan](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/configuration--setup-image-jh4473ii.png) 3. Enter a name in the Inspection Editor (for example, "Stop Scan"). ![Naming the Stop Scan action in the Inspection Editor](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/configuration--setup-image-tgi7ke2u.png) 4. Select **Remote GRPC**, then select **Stop Hovermap**. ![Remote GRPC and Stop Hovermap selected](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/configuration--setup-image-mlyrnzka.png) 5. Change the **Robot Body Control** parameter from the default **Body Pose** setting to **No Control**. ![Robot Body Control set to No Control for the Stop Scan action](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/configuration--setup-image-qtb8tp2b.png) ![Robot Body Control change confirmed for the Stop Scan action](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/configuration--setup-image-u8qoipvy.png) 6. Tap **Save** on the top right of the **Inspection Editor** window. ### Step 5: Confirm the configuration 1. Navigate to **Settings** > **Actions**. Confirm that two extra inspection actions have been added: one to start a scan and another to stop a scan. ![Start Scan and Stop Scan actions listed under Custom Inspections](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/configuration--setup-image-ewnzjyf1.png) The Spot payload setup is complete. A mapping mission can now be conducted. ## Connect to the Long Range Radio (LRR) The Long Range Radio (LRR) is an auxiliary radio system that extends the data connection to Hovermap over a longer range than conventional Wi-Fi. This results in operational and safety improvements by allowing access to the streaming point cloud and critical safety telemetry over longer distances. 1. Connect the tablet to the LRR Wi-Fi. 2. Open the Spot app. 3. If the LRR device has already been added, select it from the list of networks. Otherwise, tap **Add New Robot**. 4. Enter the Hovermap IP address on the LRR network: `192.168.50.9`. Once connected, stay at least 5 m away from the Spot robot to ensure a solid LRR connection. > [!NOTE] > As of Cortex version 4.0.2, the Hovermap IP address changed from `10.233.0.1` to `192.168.50.9`. ## Outcome Spot is paired with Hovermap, the Hovermap payload is authorised, and the Start Scan and Stop Scan actions are configured. The system is ready for scanning missions. ## Related documentation and support For assistance, contact the regional Emesent partner or the [Emesent Client Support team](https://emesent.com/customer-support/).