--- title: "Colorize a merged dataset in Aura" slug: "colorize-a-merged-dataset-in-aura" updated: 2026-08-24T05:26:44Z published: 2026-08-24T05:26:44Z canonical: "knowledge.emesent.com/colorize-a-merged-dataset-in-aura" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Colorize a merged dataset in Aura This article explains how to colorize a merged dataset in Aura. A merged dataset is colorized one scan at a time: merge the datasets first, then run a separate Colorization processing job for each individual scan in the merge. For colorizing a single scan, see [Colorize a point cloud in Aura](/v1/docs/colorizing-point-clouds-1-1). ![Merged dataset shown in the Aura Viewport before colorization](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(485).png) ## What you will need - The datasets already merged in Aura. See [Merge scans in Aura](/v1/docs/merge-workflow). - A camera and Hovermap set up correctly following the [Colorization initial setup guide](/v1/docs/colorization-initial-setup-guide). - Video footage recorded during each mission in the merge, using a supported, calibrated, and correctly configured camera. - The video files (.mp4 or .360) for each scan stored in the corresponding scan folder. - An active **Colorization** license in Aura. > [!NOTE] > Each scan in the merge is colorized as its own processing job. Repeat the procedure for every scan file in the merged dataset. ## Procedure ### Step 1: Add the merged dataset 1. Select the **Colorize** workflow in the Processing Tray. 2. Add the scan folder that contains the merged dataset output. 3. Set the merge output folder as the scan folder. ![Merge output folder set as the scan folder in the job configuration](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(486).png) ### Step 2: Select the scan and video files 1. Select the first scan file to colorize. ![First scan file of the merged dataset selected for colorization](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(487).png) 2. Select the **video** files that correspond to the selected scan file. ![Video files matching the selected scan file in the merged dataset](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(488).png) 3. Save the configuration. ### Step 3: Process each scan > [!WARNING] > Each scan is colorized as a separate processing job, so the frame review prompt appears once for each scan in the merge. To turn the pause off before starting, see [Skip the frame review pause](/v1/docs/colorizing-point-clouds-1-1#skip-frame-review). 1. Adjust processing settings as required. See [Processing settings](/v1/docs/processing-settings). 2. Start processing. 3. Repeat Step 2 and Step 3 for each additional scan file, selecting the appropriate scan file and matching video files each time. ## Outcome Each scan in the merged dataset has been colorized and is available in its output folder. The colorized point clouds can be viewed in the Viewport, and the extracted image frames and pose CSVs are available for export to third-party platforms. ## Additional information - To merge scans before colorizing, see [Merge scans in Aura](/v1/docs/merge-workflow). - To colorize a single scan, see [Colorize a point cloud in Aura](/v1/docs/colorizing-point-clouds-1-1). - For custom image masks, see [Create custom masks in Aura](/v1/docs/custom-masks-for-colorization-360-image). - For a full reference of the settings on the **Colorize** tab, see [Processing settings](/v1/docs/processing-settings).