--- title: "Clean Vehicle RTK Point Clouds" slug: "clean-vehicle-rtk-point-clouds" updated: 2026-08-24T05:26:44Z published: 2026-08-24T05:26:44Z canonical: "knowledge.emesent.com/clean-vehicle-rtk-point-clouds" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Clean Vehicle RTK Point Clouds Refer to these instructions for cleaning the noise from your Vehicle RTK point clouds using Emesent Aura. ## Overview If traffic is unavoidable during your scan, you may see noise in the point cloud from moving vehicles. You can clean this noise using Emesent Aura. > [!NOTE] > It is not recommended to use [**Moving Object Filtering**](/v1/docs/filtering-moving-objects) when conducting a vehicle scan as the drone itself will be filtered. Use the manual cleaning workflow described in this article instead. ## Remove vehicle noise from a point cloud 1. Open Emesent Aura and load your point cloud. 2. In the Main Toolbar, choose **Select Volume** under **Selection Tools**. ![Select Volume tool selected under Selection Tools in the Emesent Aura Main Toolbar](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/clean_vehicle_rtk_point_clouds-image-gd3o2t6g.jpg) 1. Using the colored handles, adjust the bounding box to cover the area where the vehicles were. ![Bounding box with colored handles adjusted to cover vehicle noise area in Emesent Aura](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/clean_vehicle_rtk_point_clouds-image-vdg5b83i.jpg) > [!NOTE] > You can use the **Rotate** tool to align the road with the bounding box if needed. 1. Press **Enter** to apply the selection. To deselect, press **Esc**. > [!WARNING] > Deletion cannot be undone. Ensure you assess the selected points from multiple perspectives before deleting. 1. Press **Delete** to delete the selected points.