--- title: "Charge GX1 batteries" slug: "charge-gx1-batteries" updated: 2026-08-24T05:26:55Z published: 2026-08-24T05:26:55Z canonical: "knowledge.emesent.com/charge-gx1-batteries" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Charge GX1 batteries This article explains how to charge GX1 batteries using the dual-bay Charger. ## Prerequisites - One or more GX1 batteries (the kit ships with three). - The dual-bay Charger. - The DC power supply and mains cable supplied with the Charger. ## Step 1: Connect the Charger to power 1. Plug the DC power supply into the back of the Charger. 2. Connect the mains cable from the power supply to a mains outlet. The Charger's fan turns on and all LEDs illuminate for two seconds at power-up. ## Step 2: Insert batteries 1. Place a GX1 battery into a Charging Bay. 2. (Optional) Place a second battery into the other Charging Bay. The Charger begins charging automatically. The status LED flashes green while a battery is charging. ## Step 3: Wait for charging to complete A status LED turns solid green when its battery is fully charged. A solid red LED indicates an error. A flashing red LED indicates the battery's charge meter needs recalibration: see [Calibrate GX1 batteries](/v1/docs/calibrate-gx1-batteries). - A single battery charges in approximately 2 hours. - Two batteries charging in parallel take up to 3 hours. Charging Bay 1 takes priority and finishes first. To confirm a battery is fully charged, press the button on the battery. All four green LEDs light up at full charge. ## Step 4: Remove the batteries Remove the batteries from the Charger when charging is complete. ## Outcome The GX1 batteries are at full charge and ready to install in the GX1. See [Install and remove GX1 batteries](/v1/docs/install-and-remove-gx1-batteries). ## Additional information - The kit ships with three batteries and the Charger has two Charging Bays. Start charging a depleted battery as soon as one comes out of the GX1 so a charged battery is always ready. - The Charger can also recalibrate a battery's charge meter to keep charge-level readings accurate. See [Calibrate GX1 batteries](/v1/docs/calibrate-gx1-batteries). - For battery runtime and planning, see [GX1 batteries](/v1/docs/gx1-batteries).