--- title: "Assemble the Hovermap Protective Cage" slug: "assemble-the-hovermap-protective-cage" updated: 2026-08-24T05:26:55Z published: 2026-08-24T05:26:55Z canonical: "knowledge.emesent.com/assemble-the-hovermap-protective-cage" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Assemble the Hovermap Protective Cage This article explains how to assemble the Hovermap protective cage, ready for shaft scanning operations. ## What you will need **Parts** | **Name** | **Part number** | **Quantity** | | --- | --- | --- | | SS Half Cage | `E32-HMC-SS` | 1 | | SS Half Cage with welded nuts | `E32-HMC-SS-LKNT` | 1 | | Cage Carbon Uni Plate Assembly | `E10-HMC-PLATE` | 1 | | Cage Upper Polycarbonate Cover | `E34-HMC-PC-TOP` | 1 | | Cage Lower Polycarbonate Cover | `E34-HMC-PC-BOT` | 1 | | Large Carabiner | `E31-1031457` | 1 | | Cage Quick Release Pin | `E31-RWB-1688` | 2 | | Lemo to D-Tap Power Cable | `E02-HVM-LDP-0300` | 1 | | M8 × 16 mm Full Thread Cap Head Screws (DIN 912) – Thread Locking A4 | `E98-SSCF-M8-16-A4-R360` | 6 | | M5 × 10 mm Full Thread Cap Head Screws (DIN 912) – Thread Locking A4 | `E95-SSCF-M5-10-A4-R360` | 8 | | M5 Hexagon Nylon Locking Nuts (DIN 985) – A2 | `E95-HNN-M5-A2` | 4 | | M5 Form A Flat Washers (DIN 125) – A2 | `E95-HPW-M5-A2` | 8 | | V-Mount Battery 95Wh | `E01-BAT-VMNT-95WH` | 1 | **Tools** - 4 mm hex driver. - 6 mm hex driver. - 8 mm spanner. ## Procedure ### Step 1: Assemble the cage frame Screw the two cage halves together to form the main frame. **Parts and tools:** - 6 mm hex driver. - *M8 × 16 mm Full Thread Cap Head Screws – Thread Lock* (`E98-SSCF-M8-16-A4-R360`). 1. Align the *SS Half Cage* (`E32-HMC-SS`) with the *SS Half Cage with welded nuts* (`E32-HMC-SS-LKNT`). 2. Insert the M8 screws through the half cage into the welded nuts on the opposite half. 3. Tighten the screws using the 6 mm hex driver. ![Cage frame assembly with M8 screws](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(243).png) ### Step 2: Attach the lower cover Screw the lower polycarbonate cover onto the cage frame. **Parts and tools:** - 4 mm hex driver. - 8 mm spanner. - *Cage Lower Polycarbonate Cover* (`E34-HMC-PC-BOT`). - *M5 × 10 mm Full Thread Cap Head Screws – Thread Lock* (`E95-SSCF-M5-10-A4-R360`). - *M5 Form A Flat Washers* (`E95-HPW-M5-A2`). - *M5 Hexagon Nylon Locking Nuts* (`E95-HNN-M5-A2`). 1. Position the lower polycarbonate cover against the cage frame. 2. Insert the M5 screws through the cover and frame, with a flat washer under each screw head. 3. Secure each screw with a nylon locking nut, using the 4 mm hex driver and 8 mm spanner to tighten. ![Lower polycarbonate cover attached to cage frame](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(244).png) ### Step 3: Attach the carbon plate Screw the carbon mounting plate to the cage assembly. **Parts and tools:** - 4 mm hex driver. - *Cage Carbon Uni Plate Assembly* (`E10-HMC-PLATE`). - *M5 × 10 mm Full Thread Cap Head Screws – Thread Lock* (`E95-SSCF-M5-10-A4-R360`). - *M5 Form A Flat Washers* (`E95-HPW-M5-A2`). 1. Position the carbon plate on the cage assembly so the vibration isolation dampers face the dovetail mount side. 2. Insert the M5 screws through the plate and into the cage frame, with a flat washer under each screw head. 3. Tighten the screws using the 4 mm hex driver. ![Carbon plate attached to cage assembly](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(245).png) ### Step 4: Attach the battery Lock the V-Mount battery into the battery mount. **Parts:** - *V-Mount Battery 95Wh* (`E01-BAT-VMNT-95WH`). 1. Position the battery against the battery mount. 2. Slide the battery to the left until it locks in place. > [!NOTE] > To release the battery, hold in the button on the side of the battery plate. ![V-Mount battery installed on battery mount](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(246).png) ### Step 5: Attach the upper cover Place and secure the upper polycarbonate cover. **Parts:** - *Cage Upper Polycarbonate Cover* (`E34-HMC-PC-TOP`). - *Cage Quick Release Pin* (`E31-RWB-1688`), × 2. 1. Place the upper polycarbonate cover so it sits in the channel of the lower polycarbonate cover. ![Upper polycarbonate cover seated in lower cover channel](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(247).png) 1. Align the holes in the cover and the steel frame, then slide the quick release pins into place. ![Quick release pins inserted through cover and frame](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(248).png) 1. Rotate the tang on each quick release pin 90 degrees to lock it in place. ![Quick release pin tang rotated to lock position](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(249).png) ### Step 6: Attach the carabiner Attach the carabiner to the assembled cage. **Parts:** - *Large Carabiner* (`E31-1031457`). 1. Attach the carabiner at the attachment point shown in the image below. > [!TIP] > The carabiner can be attached at either end of the cage, but Emesent recommends attaching it at the end with the polycarbonate cover. This orients Hovermap pointing down the hole and ensures it is sheltered properly by the cover. ![Carabiner attached to cage at recommended attachment point](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(251).png) ## Outcome The Hovermap protective cage is fully assembled, with the V-Mount battery installed, both polycarbonate covers secured, and the carabiner attached. The cage is ready to be loaded with Hovermap and deployed for shaft scanning. ![Fully assembled Hovermap protective cage](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/image(250).png) ## Additional information For assistance, contact the regional Emesent partner or the [Emesent Client Support team](https://emesent.com/customer-support/).