--- title: "Mission Review and Data Processing" slug: "6" updated: 2026-08-24T05:26:55Z published: 2026-08-24T05:26:55Z canonical: "knowledge.emesent.com/6" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Mission Review and Data Processing This article describes how to process a scan onboard the Hovermap unit in Commander, review the processed mission, and transfer the processed files to the device running Commander. From Commander 2.1 and Cortex 4.0, processed .laz files can be saved directly to the tablet. This allows network transfer of processed data, which removes the need for USB extraction from the Hovermap. Network transfer is useful on worksites with USB restrictions and improves integration with third-party software. ## What you will need - **Software**: Commander 2.1 or later and Cortex 4.0 or later. - **Hardware**: A Hovermap unit with a completed mission ready to process. ## Procedure ### Step 1: Complete the mission 1. When the scan stops, wait for the **Mission Complete** pop-up to appear. 2. Select **Review Mission** to open the mission review screen. 3. (Optional) Enter a note for the mission report. ![Mission Complete pop-up with the Review Mission option in Commander](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/6.-image-0xn0damy.png) **Figure 1.** Mission Complete pop-up in Commander. > [!NOTE] > For more information on the Commander interface, see [Commander user interface](/v1/docs/ui). ### Step 2: Select a scan 1. Select the scan to process. 2. Tick the checkbox on the left side of the mission name to select it. ![Mission list with a scan selected using the checkbox](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/6.-image-qghzwyai.png) **Figure 2.** Selecting a scan in the mission list. ### Step 3: Start processing 1. Select **Process** at the bottom right of the screen. ![Process button at the bottom right of the mission review screen](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/6.-image-fj0xjip6.png) **Figure 3.** Process button in the mission review screen. ### Step 4: Configure onboard processing 1. Select a **Level of Detail**. Available levels are **Rough**, **Low**, **Medium**, **High**, and **Very High**. 2. (Optional) Configure additional parameters: - Enable processing for scans containing reflective targets. - Enable the removal of long-range noise. ### Step 5: Start processing 1. Select **Start Processing**. The scan begins processing. This may take several minutes, depending on the scan duration. ![Start Processing button in the onboard processing configuration screen](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/6.-image-fatdn45l.png) **Figure 4.** Start Processing button in Commander. ### Step 6: View the processed mission 1. Wait for the status indicator to show **Ready to View** in green. 2. Select **View** at the bottom right to open the processed mission. ![Processed mission with a Ready to View status and the View button](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/6.-image-rqrzmj90.png) **Figure 5.** Ready to View status in Commander. ### Step 7: Interact with the scan Use the following gestures to interact with the scan and move the camera: - Pinch with two fingers to zoom. - Drag with two fingers to pan. - Drag with one finger to rotate (in perspective camera view). - Double-tap to teleport to a new view location. To change how the point cloud is displayed, open **Display Settings** using the icon to the right of the camera tools. **Display Settings** is used to enable and configure clipping planes and other settings that provide greater control over scan visualisation and review. ![Display Settings icon located to the right of the camera tools](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/6.-image-xtsbvtv9.png) **Figure 6.** Display Settings in Commander. ### Step 8: Review processed missions Once processing is complete, expand each mission to show the details of individual scans. 1. Select the **dropdown arrow** on the right side of the mission entry to expand the mission. 2. Use the expanded view to: - View each processed scan. - Review the processing settings used. - View the file location if the scan has been transferred to the device running Commander. - Reprocess the scan with different settings. - Delete scans that are no longer needed. ![Expanded mission entry showing individual scans and processing options](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/6.-image-efm679gq.png) **Figure 7.** Expanded mission entry in Commander. ### Step 9: Transfer onboard-processed files Scans processed in Commander are processed on the connected Hovermap unit. They are not automatically transferred to the device running Commander. To transfer a processed scan to the local device: 1. View the scan in **Commander**. This action starts the file transfer from the Hovermap to the local device. 2. Once transferred, locate the scan files on the Hovermap at the following path: Downloads/Processed_/ 3. Export scan data from this location as required. > [!NOTE] > To locate the exact download path, go to **Review Missions** and expand the **dropdown arrow** beside the relevant mission. ## Outcome The scan is processed onboard the Hovermap and the processed .laz files are transferred to the device running Commander, ready for export to third-party software.