--- title: "Operation" slug: "5" updated: 2026-08-24T05:26:55Z published: 2026-08-24T05:26:55Z canonical: "knowledge.emesent.com/5" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Operation ## Starting a scan with LHD #### Step 1: Connect Commander to Hovermap via Wi-Fi Launch Emesent Commander then tap **Connect** to display the **Network Settings** page. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/5.-image-oy9gxtn6.png) - Use the Android Wi-Fi Manager to ensure Wi-Fi is turned on. - Login to the Wi-Fi network where the Hovermap payloads are connected, then return to Commander. - In Commander, tap the red **Connect** button. - Alternatively, tap the Hamburger button on the top left then select **Network Settings** from the menu. - Enter the **Hostname** or **IP address** corresponding to the Hovermap payload hosted on the network, then tap the blue tick button beside the field or tap **Done** on the keyboard. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/5.-image-ealldop5.png) Once Commander detects the Hovermap and establishes a connection: - The “*No Hovermap connected*” message is replaced with “*Connected*” on the **Network** **Settings** page. - The red banner is removed from the landing page and the **Non-Autonomous Mapping** **Mission** tile becomes enabled. - Tap the **Back** button on the tablet to return to the Commander main landing page. ## #### Step 2: Starting a Scan On the Commander main landing page, tap the **Non-Autonomous Mapping Mission** tile. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/5.-image-pbg9xdfh.png) ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/5.-image-303xuj47.png) Complete the **Pre-Mission checks**, then press **Continue**. On the **Connectivity** page, observe that there is a green tick and the word “*Connected*” displayed beside the **Network** option, then press **Continue**. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/5.-image-h4ghowz7.png) On the **Scan Setup** page, enter the name of the scan then tap the tick button beside the field. All scan logs will be created with this name. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/5.-image-3dbwppia.png) Tap the **Start Scan** button to begin the scan. After the scan has completed pre-scan checks and started, tap the **Continue** button to navigate to the Main View. The scan start-up process varies but may take up to 2 minutes to complete. Once the scan has successfully started a green tick and “Ready for Mission” message will be displayed at the bottom of the page. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/5.-image-eafsgmx9.png) In the Main View, the low-definition point cloud will be displayed. Once the scan has been completed, tap **Stop Scan** at the top of the main view. For best results with the high-density previews of a scan, limit the scan time to short durations (e.g. 1-3 minutes).