--- title: "Technical Specifications" slug: "2" updated: 2026-08-24T05:26:55Z published: 2026-08-24T05:26:55Z canonical: "knowledge.emesent.com/2" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.emesent.com/articles/llms.txt > Use this file to discover all available pages before exploring further. # Technical Specifications ## | **Length** | 450mm | | --- | --- | | **Width** | 263mm | | **Height** | 319mm @ maximum magnet extension | ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/2.-image-gp4hweg2.png) ## ## Emesent Product Compatibility ### Commander and Cortex Compatibility for LHD LHD is now fully supported in the mainline releases of Commander and Cortex. Separate LHD-specific builds are no longer required. For the best experience with LHD, use the latest versions available from the Emesent Software Downloads page. Legacy versions, such as **Commander 1.5.1 for LHD**, were previously required but are now obsolete and can be retired from use. | Product | Compatible | | --- | --- | | Hovermap ST | Yes | | Hovermap ST-X1 | Yes1 | | Hovermap ST/ST-X w/ LRR2 | No2 | | Hovermap ST/ST-X w/ colorization3 | No3 | | Hovermap ST/ST-X w/ LRR colorization | No | | Commander Prototype | Yes | ### > [!CAUTION] > LHD with LRR Incompatibility > > The LRR must be removed. LRR thermal performance cannot be guaranteed in LHD Mount.1 > > A Hovermap ST or ST-X with a calibrated LRR colorization system cannot fit into the LHD Mount.2 > > The Colorization mounting bracket can remain attached to the Hovermap ST or ST-X, but the camera cannot be fitted.3 ## M12 Connector Pinouts The following section displays the pinout for the LHD Mount back panel connectors. ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/2.-image-useqvupw.png) | **Power (PWR) (14V-48V)** | **Ethernet (ETH)** | | --- | --- | | **Pin** | **Designation** | **Pin** | **Designation** | | 1 | Power + | 1 | ETH_TX_P | | 2 | NC | 2 | ETH_RX_P | | 3 | GND | 3 | ETH_TX_N | | 4 | NC | 4 | ETH_RX_N | | **M12 connector (M12A-04PMMP-SF8001) A-coded male pins** ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/Power (PWR) (14V-48V).png) | **M12 connector (M12D-04PFFP-SF8001) D-coded female pins** ![](https://cdn.document360.io/c908b593-57d7-4fc8-b409-592fc1051369/Images/Documentation/Ethernet (ETH)(2).png) |